70mm to 60mm Straight Hose Reducer + 2 Worm Drive Clips Blue
ABS, made in the UK | 1 fitting + 2 zinc plated clamps | Clamps 60-80 & 55-70 mm | 2 3/4 inch > 2 3/8 inch | Part BSR070060
Brand: AP Automotive- 70mm ID
- 2mm wall
- -20°C to +105°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AP Automotive
- Material
- ABS Plastic
- Colour
- Blue
- Inside diameter
- 70mm
- Wall thickness
- 2mm
- Temperature range
- -20°C to +105°C
About this item
- 🔗 JOINS TWO HOSE SIZES - connects a 70mm internal diameter hose to a 60mm hose in a straight line. Push each end into its hose up to the centre collar and secure with the worm drive clips included for a firm, leak-free joint.
- 📏 RIBBED BARBS BOTH ENDS - about 75mm (3 inch) long, with ribbed barbs on each spigot that grip the inside of the hose, and a raised centre collar so each hose stops at the right depth.
- 💪 TOUGH ABS PLASTIC - made in the UK from rigid, lightweight ABS with a matte finish and a 2mm wall. Rated -20°C to +105°C; not for high-temperature lines.
- 🔩 CLIPS INCLUDED - includes 2 x zinc plated worm drive clips: 1 x 60-80mm for the 70mm hose and 1 x 55-70mm for the 60mm hose. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip clamps its hose whether the hose wall is thin or thick. Tighten with a screwdriver for an even, leak-free grip.
- 🔵 THIS KIT: 1 x 70mm to 60mm blue straight reducer + 1 x 60-80mm + 1 x 55-70mm zinc plated worm drive clips - for pond pump and filter hose, water butts and irrigation, aquariums, marine, automotive breather, vacuum and coolant overflow lines, and workshop hoses.
Product description
Straight Hose Reducer with Worm Drive Clips - this kit includes 1 x 70mm to 60mm blue straight reducer and 1 x 60-80mm + 1 x 55-70mm zinc plated worm drive hose clips, so everything needed for the joint arrives together.
- JOINS TWO HOSE SIZES - connects a 70mm internal diameter hose to a 60mm hose in a straight line. Push each end into its hose up to the centre collar and secure with the worm drive clips included for a firm, leak-free joint.
- RIBBED BARBS BOTH ENDS - about 75mm (3 inch) long, with ribbed barbs on each spigot that grip the inside of the hose, and a raised centre collar so each hose stops at the right depth.
- TOUGH ABS PLASTIC - made in the UK from rigid, lightweight ABS with a matte finish and a 2mm wall. Rated -20°C to +105°C; not for high-temperature lines.
- CLIPS INCLUDED - includes 2 x zinc plated worm drive clips: 1 x 60-80mm for the 70mm hose and 1 x 55-70mm for the 60mm hose. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip clamps its hose whether the hose wall is thin or thick. Tighten with a screwdriver for an even, leak-free grip.
- THIS KIT: 1 x 70mm to 60mm blue straight reducer + 1 x 60-80mm + 1 x 55-70mm zinc plated worm drive clips - for pond pump and filter hose, water butts and irrigation, aquariums, marine, automotive breather, vacuum and coolant overflow lines, and workshop hoses.
In the box: 1 x 70mm to 60mm blue straight reducer, 1 x 60-80mm zinc plated worm drive hose clip, 1 x 55-70mm zinc plated worm drive hose clip.
Fitting: measure the internal diameter of each hose, fit each hose fully onto the fitting, slide a clip over each hose end and tighten it with a screwdriver.
Product details
| Brand | AP Automotive |
|---|---|
| Material | ABS Plastic |
| Colour | Blue |
| Inside diameter | 70mm |
| Wall thickness | 2mm |
| Temperature range | -20°C to +105°C |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | AP Automotive |