63mm Straight Barbed Hose Joiner + 2 Worm Drive Clips Black

Two 60-80mm zinc plated clamps | Fits walls up to 8.5mm | Low-key dark look | -20°C to +105°C | For 2 1/2 inch ID tubing

Brand: AP Automotive
  • 63mm ID
  • 63mm OD
  • 2mm wall
  • -20°C to +105°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£2600

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
AP Automotive
Material
Plastic
Colour
Black
Inside diameter
63mm
Outside diameter
63mm
Wall thickness
2mm
Temperature range
-20°C to +105°C

About this item

  • 🔗 JOINS TWO 63mm HOSES - connects two hoses with a 63mm (2 1/2 inch) internal diameter end to end in a straight line, to repair a split hose or extend a run. Push each end into its hose up to the centre collar and secure with the worm drive clips included.
  • 📏 BARBED BOTH ENDS - about 75mm (3 inch) long, with identical ribbed barbs on each end that grip the inside of the hose, and a raised centre collar so each hose stops at the right depth. No adhesive or sealant needed.
  • 💪 TOUGH ABS PLASTIC - made in the UK from rigid, lightweight 3D-printed ABS with a matte finish and a 2mm wall; resists cracking, impact and UV for outdoor use. Rated -20°C to +105°C; not for high-temperature lines.
  • 🔩 CLIPS INCLUDED - includes 2 x zinc plated worm drive clips, 60-80mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 80mm down to 60mm, to suit a 63mm ID hose with a wall of up to 8.5mm. Tighten with a screwdriver for an even, leak-free grip.
  • ⚫ THIS KIT: 1 x 63mm black straight joiner + 2 x 60-80mm zinc plated worm drive clips - for pond pump and filter hose, water features, garden irrigation and hose repairs, water butts and water transfer, aquariums, automotive breather and vacuum lines, and workshop hoses.

Product description

Straight Barbed Hose Joiner with Worm Drive Clips - this kit includes 1 x 63mm black straight joiner and 2 x 60-80mm zinc plated worm drive hose clips, so everything needed for the joint arrives together.

  • JOINS TWO 63mm HOSES - connects two hoses with a 63mm (2 1/2 inch) internal diameter end to end in a straight line, to repair a split hose or extend a run. Push each end into its hose up to the centre collar and secure with the worm drive clips included.
  • BARBED BOTH ENDS - about 75mm (3 inch) long, with identical ribbed barbs on each end that grip the inside of the hose, and a raised centre collar so each hose stops at the right depth. No adhesive or sealant needed.
  • TOUGH ABS PLASTIC - made in the UK from rigid, lightweight 3D-printed ABS with a matte finish and a 2mm wall; resists cracking, impact and UV for outdoor use. Rated -20°C to +105°C; not for high-temperature lines.
  • CLIPS INCLUDED - includes 2 x zinc plated worm drive clips, 60-80mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 80mm down to 60mm, to suit a 63mm ID hose with a wall of up to 8.5mm. Tighten with a screwdriver for an even, leak-free grip.
  • THIS KIT: 1 x 63mm black straight joiner + 2 x 60-80mm zinc plated worm drive clips - for pond pump and filter hose, water features, garden irrigation and hose repairs, water butts and water transfer, aquariums, automotive breather and vacuum lines, and workshop hoses.

Fitting: measure the internal diameter of each hose, push each hose fully onto the joiner up to the centre collar, slide a clip over each hose end and tighten it with a screwdriver.

Product details

BrandAP Automotive
MaterialPlastic
ColourBlack
Inside diameter63mm
Outside diameter63mm
Wall thickness2mm
Temperature range-20°C to +105°C
ShapeCircular
Pack quantity1
ManufacturerAP Automotive

Products related to this item