63mm Rubber Radiator Coolant Hose 4m with 2 Hose Clips, EPDM Pipe
Pair of 60-80mm Zinc Clamps | -40°C to +120°C | 73mm OD | 13.1ft Length | Ozone & Antifreeze Resistant
Brand: AP Automotive- 63mm ID
- 73mm OD
- -40°C to +120°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AP Automotive
- Material
- EPDM Rubber
- Colour
- Black
- Inside diameter
- 63mm
- Outside diameter
- 73mm
- Length
- 4m
- Temperature range
- -40°C to +120°C
About this item
- 📦 WHAT'S IN THE BOX – one continuous 4 metres (13.1ft) of rubber radiator hose, 63mm (2 1/2") internal diameter, 73mm outside diameter, plus two 60-80mm zinc plated worm drive hose clips: the hose and both clamps for the job in one order.
- 🛡️ BUILT TO LAST – black EPDM rubber tube with high-tensile synthetic textile reinforcement and a heat, ozone and weather resistant cover.
- 🌡️ -40°C TO +120°C RATED – rated -40°C to +120°C. Suits top and bottom radiator hoses, coolant, heater and water lines on cars, vans, 4x4s, tractors and engines.
- ✂️ CUT TO FIT – trim the hose square with a sharp blade, push it fully over the pipe stub and fit a clip over each end. For coolant, antifreeze, water and air; not for fuel or oil.
- 🔩 MATCHED ZINC CLIPS – the 60-80mm W1 zinc plated worm drive clips are sized for the 73mm outside diameter, so they slide over the hose end and close down tight with a flat screwdriver or nut driver.
Product description
63mm Rubber Radiator Coolant Hose 4m with 2 Hose Clips, EPDM Pipe
A rubber radiator hose supplied with two matching zinc plated worm drive hose clips. Black EPDM rubber tube with high-tensile synthetic textile reinforcement and a heat, ozone and weather resistant cover. Rated -40°C to +120°C.
- ✅ In the box: 4m of 63mm bore hose and 2 x 60-80mm zinc plated worm drive hose clips
- Size: 63mm (2 1/2") ID x 73mm OD
- Uses: top and bottom radiator hoses, coolant, heater and water lines on cars, vans, 4x4s, tractors and engines
- Cut square to length and secure each end with one of the two clips supplied
- For coolant, antifreeze, water and air. Not for fuel or oil
Product details
| Brand | AP Automotive |
|---|---|
| Material | EPDM Rubber |
| Colour | Black |
| Inside diameter | 63mm |
| Outside diameter | 73mm |
| Length | 4m |
| Temperature range | -40°C to +120°C |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | AP Automotive |