63mm 45 Degree Aluminium Tube Bend + 2 Worm Drive Clips Silver

1 Fitting + 2 Clamps | Gentle Line Offset | Zinc Clamps 60-80 mm | Suits 63 mm ID | -40°C to +220°C | 59.8mm ID | 1.6mm Wall

Brand: AutoSiliconeHoses.com
  • 63mm ID
  • 63mm OD
  • 1.6mm wall
  • -40°C to +220°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£1745

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
AutoSiliconeHoses.com
Material
Aluminium
Colour
Silver
Inside diameter
63mm
Outside diameter
63mm
Wall thickness
1.6mm
Temperature range
-40°C to +220°C

About this item

  • ↪️ Eases a hose run round a shallow change of direction without kinking or squashing the hose; intake, intercooler, turbo, coolant and custom exhaust pipework
  • 📏 63mm (2 1/2 inch) outside diameter, 59.8mm inside, with 150mm (6 inch) straight legs each side to slide hoses over
  • 🧱 Made from T6063 aluminium with a 1.6mm wall; mandrel-bent so the bore stays smooth and round through the bend
  • 🔩 CLIPS INCLUDED - includes 2 x zinc plated worm drive clips, 60-80mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 80mm down to 60mm, sized for 63mm ID silicone hose with a 4-4.5mm wall (hose OD about 71-72mm); it suits a hose wall of about 0.5-8.5mm. Tighten with a screwdriver for an even, leak-free grip.
  • 📦 THIS KIT: 1 x 63mm OD 45 Degree aluminium tube bend + 2 x 60-80mm zinc plated worm drive clips - for turbo, intercooler, intake and coolant hose runs.

Product description

Aluminium Tube Bend with Worm Drive Clips - this kit includes 1 x 63mm OD 45 Degree aluminium tube bend and 2 x 60-80mm zinc plated worm drive hose clips, so everything needed for the joint arrives together.

  • Eases a hose run round a shallow change of direction without kinking or squashing the hose; intake, intercooler, turbo, coolant and custom exhaust pipework
  • 63mm (2 1/2 inch) outside diameter, 59.8mm inside, with 150mm (6 inch) straight legs each side to slide hoses over
  • Made from T6063 aluminium with a 1.6mm wall; mandrel-bent so the bore stays smooth and round through the bend
  • CLIPS INCLUDED - includes 2 x zinc plated worm drive clips, 60-80mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 80mm down to 60mm, sized for 63mm ID silicone hose with a 4-4.5mm wall (hose OD about 71-72mm); it suits a hose wall of about 0.5-8.5mm. Tighten with a screwdriver for an even, leak-free grip.
  • THIS KIT: 1 x 63mm OD 45 Degree aluminium tube bend + 2 x 60-80mm zinc plated worm drive clips - for turbo, intercooler, intake and coolant hose runs.

In the box: 1 x 63mm OD 45 Degree aluminium tube bend, 2 x zinc plated worm drive clips, 60-80mm, one for each hose end.

Fitting: push each hose fully over the fitting (past the bead where there is one), slide a clip over each hose end and tighten it with a screwdriver.

Product details

BrandAutoSiliconeHoses.com
MaterialAluminium
ColourSilver
Inside diameter63mm
Outside diameter63mm
Wall thickness1.6mm
Temperature range-40°C to +220°C
Pack quantity1
ManufacturerAuto Silicone Hoses

Products related to this item