63mm (2 1/2") ID 45 Degree Rubber Elbow Hose + 2 Hose Clips, Radiator Kit
30°C to +125°C (Peak +145°C) | 72mm OD | Zinc Worm Drive 60-80mm | Gentle Offset Bend | Single Repair | 4.5mm Wall
Brand: AutoSiliconeHoses.com- 63mm ID
- 72mm OD
- 4.5mm wall
- -30°C to +125°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- EPDM Rubber
- Colour
- Black
- Inside diameter
- 63mm
- Outside diameter
- 72mm
- Wall thickness
- 4.5mm
- Temperature range
- -30°C to +125°C
- Maximum pressure
- 10 bar
About this item
- 🔧 1 ELBOW + 2 CLIP KIT - 1 x 63mm (2 1/2") ID 45° rubber elbow with 2 zinc-plated worm drive hose clips (60-80mm), two per elbow, sized to the 72mm outside diameter. Everything needed to fit, in one order.
- 🌡️ HEAT RESISTANT EPDM - Smooth EPDM rubber inside and out, rated -30°C to +125°C with peaks to +145°C, resistant to heat, ozone and weathering.
- 💪 FIBRE REINFORCED - One ply of high tensile fibre yarn in a 4.5mm wall: 10 bar working pressure, 30 bar burst (3:1 safety factor). Made to SAE J20R3.
- 📏 LONG 150MM LEGS - Each leg is 150mm (6"), 300mm (12") overall, with plenty of room for a clip on each end and to trim to fit.
- 🚗 COOLANT, WATER & AIR - 45° offset connections on radiator and heater hoses, engine cooling, water and air lines on cars, vans, tractors, plant and marine engines. Not for fuel lines.
Product description
63mm (2 1/2") 45 Degree Rubber Elbow Hose + Hose Clip Kit
- 1 x 45° moulded EPDM rubber elbow, 63mm ID, 72mm OD, 4.5mm wall
- 2 x zinc-plated worm drive hose clips, 60-80mm (two per elbow)
- -30°C to +125°C, peak +145°C; 10 bar working, 30 bar burst; SAE J20R3
- 150mm legs, 300mm overall
A ready-to-fit kit for coolant, water and air connections that need to turn a corner: radiator and heater hoses, engine cooling on cars, vans, tractors, plant and marine engines, and workshop repairs. Push the hose over the leg, position a clip near each end and tighten. Not suitable for fuel lines.
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | EPDM Rubber |
| Colour | Black |
| Inside diameter | 63mm |
| Outside diameter | 72mm |
| Wall thickness | 4.5mm |
| Temperature range | -30°C to +125°C |
| Maximum pressure | 10 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | Auto Silicone Hoses |