57mm Plastic Blanking End Cap Bung + 1 Worm Drive Clip Black
Single 55-70mm Zinc Clamp | Seals 57mm ID Hose | -20°C to +105°C | 30mm Deep | ABS 3D Printed | Jet Tone
Brand: AutoSiliconeHoses.com- -20°C to +105°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- ABS Plastic
- Colour
- Black
- Temperature range
- -20°C to +105°C
About this item
- 📦 WHAT'S IN THE BOX – 1 x 57mm (2-1/4") black plastic blanking end cap bung plus 1 x 55-70mm zinc plated worm drive hose clip, so the bung is clamped in the hose and can't push or work out.
- 🔒 SEALS A 57mm ID HOSE – push the bung into the end of a 57mm internal diameter hose or pipe to blank it off, keep dirt out and stop drips; then clamp the hose over it with the clip included.
- 💪 TOUGH ABS – high quality black ABS plastic, 3D printed, resistant to cracking, corrosion and temperature changes, rated -20°C to +105°C.
- 🌊 VERSATILE USE – for water, air and non-aggressive chemical systems in home, garden, pond, irrigation, plumbing and workshop setups. 30mm deep.
- 🔩 MATCHED ZINC CLIP – the 55-70mm W1 zinc plated worm drive clip suits a 57mm ID hose with a wall of about 0.5-6.5mm: slide the clip over the hose, push the bung fully in and tighten over the bung with a screwdriver.
Product description
57mm Plastic Blanking End Cap Bung + 1 Worm Drive Clip Black
A 57mm black plastic blanking end cap bung supplied with a matching zinc plated worm drive hose clip. ABS plastic, 3D printed, 30mm deep, rated -20°C to +105°C, for water, air and non-aggressive chemicals.
- ✅ In the box: 1 x 57mm plastic blanking end cap bung and 1 x 55-70mm zinc plated worm drive hose clip
- Fits: 57mm internal diameter hose and pipe
- Fitting: slide the clip over the hose, push the bung fully into the hose end and tighten the clip over the bung
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | ABS Plastic |
| Colour | Black |
| Temperature range | -20°C to +105°C |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | Auto Silicone Hoses |