51mm (2") ID Red 2m Silicone Straight Hose + 2 x Hose Clips
Pair of 55-70 mm Zinc Clamps | Fits 51mm Spigot, 62mm OD | 4.5mm Wall | 6.6ft Length | Bold Race-Bay Look
Brand: AutoSiliconeHoses.com- 51mm ID
- 62mm OD
- 4.5mm wall · 3-ply
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- Silicone Rubber
- Colour
- Red
- Inside diameter
- 51mm
- Outside diameter
- 62mm
- Wall thickness
- 4.5mm
- Reinforcement
- 3-ply polyester
- Length
- 2m
About this item
- 📦 WHAT'S IN THE BOX – one continuous 2 metres (6.6ft) length of red silicone hose, 51mm (2") ID x 62mm OD, 4.5mm wall, plus two 55-70mm zinc plated worm drive hose clips: the hose and both clamps for the job in one order.
- 🌡️ HEAT RESISTANT – stays flexible in engine-bay heat and resists ozone and weathering.
- 🔧 MADE FOR THE JOB – suits coolant, heater, bypass, breather and intake joints on cars, vans, motorbikes, 4x4s, plant and marine engines.
- 🛡️ BUILT TO LAST – 3-ply polyester reinforced.
- 🔩 MATCHED ZINC CLIPS – the 55-70mm zinc plated worm drive hose clips are sized for the 62mm outside diameter, so they close down tight with a flat screwdriver. 🔴 Red hose.
Product description
51mm (2") ID Red 2m Silicone Straight Hose + 2 x Hose Clips
Supplied with two matching zinc plated worm drive hose clips sized for the 62mm outside diameter, for coolant, heater, bypass, breather and intake joints on cars, vans, motorbikes, 4x4s, plant and marine engines.
- ✅ In the box: one continuous 2 metres (6.6ft) length of red silicone hose, 51mm (2") ID x 62mm OD, 4.5mm wall and 2 x 55-70mm zinc plated worm drive hose clips
- Clips: 55-70mm range, sized for the 62mm outside diameter
Fitting tip: push the hose fully over the pipe or spigot and fit a clip over each end, tightening evenly.
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | Silicone Rubber |
| Colour | Red |
| Inside diameter | 51mm |
| Outside diameter | 62mm |
| Wall thickness | 4.5mm |
| Reinforcement | 3-ply polyester |
| Length | 2m |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | Auto Silicone Hoses |