51mm (2") ID Polyester Reinforced Clear PVC Hose 5m with 2 Hose Clips

10°C to +65°C (Peak 70°C) | Pair of 45-60mm Stainless Clamps | 16.4ft for Short Runs | Garden, Workshop & Farm

Brand: AutoSiliconeHoses.com
  • 51mm ID
  • 58mm OD
  • 3.4mm wall
  • -10°C to +65°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£5695

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
AutoSiliconeHoses.com
Material
Polyvinyl Chloride (PVC)
Colour
Clear
Inside diameter
51mm
Outside diameter
58mm
Wall thickness
3.4mm
Length
5m
Temperature range
-10°C to +65°C
Maximum pressure
4 bar

About this item

  • 📦 IN THE BOX – a 5 metre (16.4 ft) length of clear braided PVC hose, 51mm (2") ID x 58mm OD with a 3.4mm wall, plus two 45-60mm stainless steel worm drive hose clips sized for its 58mm outside diameter.
  • 🌿 GARDEN, WORKSHOP & FARM – the hose and its clips arrive in one order, so the line can go in the day it lands. At 51mm bore it suits pump outlets, water transfer, drainage, agricultural and industrial fluid lines.
  • 🔍 CLEAR PVC WITH TRIPLE POLYESTER BRAID – Soft PVC inner and outer layers with a triple polyester yarn reinforcement resist kinking and stretching under pressure, and you can see water moving and spot air locks or debris at a glance. This 5m length is right for short runs around the garden, workshop or bench.
  • 💪 4 BAR WORKING PRESSURE – 12 bar burst (3:1 safety margin) at 51mm bore, minimum bend radius 360mm. Rated -10°C to +65°C (peak +70°C) for indoor and outdoor use.
  • 🔩 MATCHED STAINLESS CLIPS – the 45-60mm stainless steel worm drive clips put the 58mm OD in the middle to upper part of their range, so they slide on and still close down tight, and they won't rust outdoors or around water. Push the hose fully onto the fitting and tighten one clip over each end.

Product description

51mm (2") ID Polyester Reinforced Clear PVC Hose 5m with 2 Hose Clips

Flexible, transparent PVC hose with soft PVC inner and outer layers and a triple polyester yarn braid, supplied with two stainless steel worm drive hose clips sized for it.

  • In the box: 5m of 51mm (2") clear braided PVC hose and 2 x 45-60mm stainless steel worm drive hose clips.
  • This size: 51mm (2") Inside Diameter, 58mm Outside Diameter, 3.4mm wall, 5m long.
  • Pressure: 4 bar working, 12 bar burst (3:1 safety margin).
  • Bend radius: 360mm minimum.
  • Temperature: -10°C to +65°C (peak +70°C).
  • Standard: ISO 5774:2016 Type A.
  • Media: water, air and light chemicals.

Fitting: match the hose bore to your hose tail or barb (51mm), warm the end in hot water to ease it on, push it fully home and tighten one clip over each end. The clips are sized for the 58mm outside diameter.

Product details

BrandAutoSiliconeHoses.com
MaterialPolyvinyl Chloride (PVC)
ColourClear
Inside diameter51mm
Outside diameter58mm
Wall thickness3.4mm
Length5m
Temperature range-10°C to +65°C
Maximum pressure4 bar
ShapeRound
Pack quantity1
ManufacturerAuto Silicone Hoses

Products related to this item