51mm (2") ID Polyester Reinforced Clear PVC Hose 2m with 2 Hose Clips
10°C to +65°C (Peak 70°C) | Pair of 45-60mm Stainless Clamps | 6.6ft for Short Connections | Garden, Workshop & Farm
Brand: AutoSiliconeHoses.com- 51mm ID
- 58mm OD
- 3.4mm wall
- -10°C to +65°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- Polyvinyl Chloride (PVC)
- Colour
- Clear
- Inside diameter
- 51mm
- Outside diameter
- 58mm
- Wall thickness
- 3.4mm
- Length
- 2m
- Temperature range
- -10°C to +65°C
- Maximum pressure
- 4 bar
About this item
- 📦 IN THE BOX – a 2 metre (6.6 ft) length of clear braided PVC hose, 51mm (2") ID x 58mm OD with a 3.4mm wall, plus two 45-60mm stainless steel worm drive hose clips sized for its 58mm outside diameter.
- 🌿 GARDEN, WORKSHOP & FARM – the hose and its clips arrive in one order, so the line can go in the day it lands. At 51mm bore it suits pump outlets, water transfer, drainage, agricultural and industrial fluid lines.
- 🔍 CLEAR PVC WITH TRIPLE POLYESTER BRAID – Soft PVC inner and outer layers with a triple polyester yarn reinforcement resist kinking and stretching under pressure, and you can see water moving and spot air locks or debris at a glance. This 2m length is ideal for short connections between pump, filter and outlet.
- 💪 4 BAR WORKING PRESSURE – 12 bar burst (3:1 safety margin) at 51mm bore, minimum bend radius 360mm. Rated -10°C to +65°C (peak +70°C) for indoor and outdoor use.
- 🔩 MATCHED STAINLESS CLIPS – the 45-60mm stainless steel worm drive clips put the 58mm OD in the middle to upper part of their range, so they slide on and still close down tight, and they won't rust outdoors or around water. Push the hose fully onto the fitting and tighten one clip over each end.
Product description
51mm (2") ID Polyester Reinforced Clear PVC Hose 2m with 2 Hose Clips
Flexible, transparent PVC hose with soft PVC inner and outer layers and a triple polyester yarn braid, supplied with two stainless steel worm drive hose clips sized for it.
- In the box: 2m of 51mm (2") clear braided PVC hose and 2 x 45-60mm stainless steel worm drive hose clips.
- This size: 51mm (2") Inside Diameter, 58mm Outside Diameter, 3.4mm wall, 2m long.
- Pressure: 4 bar working, 12 bar burst (3:1 safety margin).
- Bend radius: 360mm minimum.
- Temperature: -10°C to +65°C (peak +70°C).
- Standard: ISO 5774:2016 Type A.
- Media: water, air and light chemicals.
Fitting: match the hose bore to your hose tail or barb (51mm), warm the end in hot water to ease it on, push it fully home and tighten one clip over each end. The clips are sized for the 58mm outside diameter.
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | Polyvinyl Chloride (PVC) |
| Colour | Clear |
| Inside diameter | 51mm |
| Outside diameter | 58mm |
| Wall thickness | 3.4mm |
| Length | 2m |
| Temperature range | -10°C to +65°C |
| Maximum pressure | 4 bar |
| Shape | Round |
| Pack quantity | 1 |
| Manufacturer | Auto Silicone Hoses |