45° Silicone Elbow Reducer 42-38mm Red with 2 Stainless T-Bolt Clamps

Clamp Ranges 48-51 & 44-47mm | 51/47mm OD | -50 to +250°C | 4.5mm Wall, 3 Ply | Offset Turn + Step Down | Race-Style Gloss

Brand: AutoSiliconeHoses.com
  • 51mm OD
  • 4.5mm wall · 3-ply
  • -50°C TO +250°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£2845

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
AutoSiliconeHoses.com
Material
Silicone
Colour
Red
Outside diameter
51mm
Wall thickness
4.5mm
Reinforcement
3-ply polyester
Length
300mm
Temperature range
-50°C TO +250°C

About this item

  • 📦 WHAT'S IN THE BOX – one red silicone 45 degree reducer elbow from 42mm to 38mm internal diameter, 51/47mm outside diameter, plus one 48-51mm and one 44-47mm stainless steel T-bolt clamp: the part and a T-bolt clamp for each end in one order.
  • 🔧 45 DEGREE OFFSET + STEP DOWN – turns 45 degrees and steps a 42mm pipe down to 38mm in one moulded part, with 150mm legs to trim to fit. Match each internal diameter to the outside of the pipe it pushes over. Typical uses at this size: top and bottom radiator hoses, thermostat housing pipes, and turbo and intake hoses on smaller engines.
  • 🌡️ -50°C TO +250°C RATED – silicone stays flexible next to a hot turbo and in cold weather.
  • 🛡️ 3-PLY POLYESTER REINFORCED, SAE J20 R3 – 3 layers of polyester fabric in the 4.5mm wall hold the shape under boost pressure and vacuum; silicone resists ozone, UV and ageing.
  • 🔩 STAINLESS T-BOLT CLAMPS – one 48-51mm and one 44-47mm stainless steel T-bolt clamp, each sized so the 51/47mm outside diameter sits inside its clamping range. Full stainless W4 grade with a wide, smooth band and a T-bolt that pulls up evenly all the way round for a firm seal on boost and intercooler pipework.

Product description

45° Silicone Elbow Reducer 42-38mm Red with 2 Stainless T-Bolt Clamps

A silicone 45 degree reducer elbow from 42mm to 38mm internal diameter supplied with matching stainless steel T-bolt clamps, one for each end, rated -50°C to +250°C. T-bolt clamps give a stronger, more even grip than worm drive clips, so they suit turbo, intercooler and charge pipes where boost pressure can push a hose off. For air, water and coolant; not for fuel or oil.

  • ✅ In the box: 1 x silicone 45 degree reducer elbow from 42mm to 38mm internal diameter, 1 x 48-51mm stainless steel T-bolt clamp, 1 x 44-47mm stainless steel T-bolt clamp
  • Size: silicone 45 degree reducer elbow from 42mm to 38mm internal diameter, 51/47mm outside diameter, 4.5mm wall
  • Construction: 3-ply polyester reinforced silicone, SAE J20 R3
  • Clamps: full stainless steel W4 grade band, bridge, T-bolt and nut; wide band with a smooth inner face that won't cut into silicone; uniform 360° clamping, DIN 3017
  • How to measure: each clamp range is the outside diameter of the hose once it is pushed onto the pipe
  • Fitting: clean the pipe ends, push the hose fully on, slip a clamp over each end about 5mm in from the edge and tighten the T-bolt evenly; re-check once the engine has been up to temperature

Product details

BrandAutoSiliconeHoses.com
MaterialSilicone
ColourRed
Outside diameter51mm
Wall thickness4.5mm
Reinforcement3-ply polyester
Length300mm
Temperature range-50°C TO +250°C
ShapeCircular
Pack quantity1
ManufacturerAuto Silicone Hoses

Products related to this item