45 Degree Silicone Reducer Elbow 38-25mm Black + 2 Stainless T-Bolt Clamps

Clamp Ranges 44-47 & 32-35mm | 47/34mm OD | -50 to +250°C | 4.5mm Wall, 3 Ply | 45° Offset + Size Change | OEM-Style Gloss

Brand: AP Automotive
  • 47mm OD
  • 4.5mm wall · 3-ply
  • -50°C TO +250°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£2545

Price includes VAT

Colour: Black
Size: 38mm (1 1/2") to 25mm (1")
How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

Not sure of your size? Hose size guide ›

Brand
AP Automotive
Material
Silicone
Colour
Black
Outside diameter
47mm
Wall thickness
4.5mm
Reinforcement
3-ply polyester
Length
300mm
Temperature range
-50°C TO +250°C

About this item

  • 📦 WHAT'S IN THE BOX – one black silicone 45 degree reducer elbow from 38mm to 25mm internal diameter, 47/34mm outside diameter, plus one 44-47mm and one 32-35mm stainless steel T-bolt clamp: the part and a T-bolt clamp for each end in one order.
  • 🔧 45 DEGREE OFFSET + STEP DOWN – turns 45 degrees and steps a 38mm pipe down to 25mm in one moulded part, with 150mm legs to trim to fit. Match each internal diameter to the outside of the pipe it pushes over.
  • 🌡️ -50°C TO +250°C RATED – silicone stays flexible next to a hot turbo and in cold weather.
  • 🛡️ 3-PLY POLYESTER REINFORCED – 3 layers of polyester fabric in the 4.5mm wall hold the shape under boost pressure and vacuum; silicone resists ozone, UV and ageing.
  • 🔩 STAINLESS T-BOLT CLAMPS – one 44-47mm and one 32-35mm stainless steel T-bolt clamp, each sized so the 47/34mm outside diameter sits inside its clamping range. Full stainless W4 grade with a wide, smooth band and a T-bolt that pulls up evenly all the way round for a firm seal on boost and intercooler pipework.

Product description

45 Degree Silicone Reducer Elbow 38-25mm Black + 2 Stainless T-Bolt Clamps

A silicone 45 degree reducer elbow from 38mm to 25mm internal diameter supplied with matching stainless steel T-bolt clamps, one for each end, rated -50°C to +250°C. T-bolt clamps give a stronger, more even grip than worm drive clips, so they suit turbo, intercooler and charge pipes where boost pressure can push a hose off. For air, water and coolant; not for fuel or oil.

  • ✅ In the box: 1 x silicone 45 degree reducer elbow from 38mm to 25mm internal diameter, 1 x 44-47mm stainless steel T-bolt clamp, 1 x 32-35mm stainless steel T-bolt clamp
  • Size: silicone 45 degree reducer elbow from 38mm to 25mm internal diameter, 47/34mm outside diameter, 4.5mm wall
  • Construction: 3-ply polyester reinforced silicone
  • Clamps: full stainless steel W4 grade band, bridge, T-bolt and nut; wide band with a smooth inner face that won't cut into silicone; uniform 360° clamping, DIN 3017
  • How to measure: each clamp range is the outside diameter of the hose once it is pushed onto the pipe
  • Fitting: clean the pipe ends, push the hose fully on, slip a clamp over each end about 5mm in from the edge and tighten the T-bolt evenly; re-check once the engine has been up to temperature

Product details

BrandAP Automotive
MaterialSilicone
ColourBlack
Outside diameter47mm
Wall thickness4.5mm
Reinforcement3-ply polyester
Length300mm
Temperature range-50°C TO +250°C
ShapeCircular
Pack quantity1
ManufacturerAP Automotive

Products related to this item