45 Degree Silicone Elbow Reducer 76mm to 67mm Blue with 2 Hose Clips
70-90mm & 60-80mm Zinc Clamps | -50 to +250°C | 87/78mm OD | 5.5mm Wall, 4 Ply | Offset Turn + Step Down | Show-Car Gloss
Brand: HOSES UK- 87mm OD
- 5.5mm wall · 4-ply
- -50°C TO +250°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit$26.00
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips$35.00
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers$73.00
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat$20.00
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
- Brand
- HOSES UK
- Material
- Silicone
- Colour
- Blue
- Outside diameter
- 87mm
- Wall thickness
- 5.5mm
- Reinforcement
- 4-ply polyester
- Length
- 300mm
- Temperature range
- -50°C TO +250°C
- Maximum pressure
- 10.5 bar
About this item
- 📦 WHAT'S IN THE BOX – one 45 degree reducing elbow from 76mm to 67mm internal diameter, 87/78mm outside diameter, plus one 70-90mm and one 60-80mm zinc plated worm drive hose clip: the part and a clamp for each end in one order.
- 🔧 JOINS TWO SIZES – steps a 76mm pipe down to 67mm and turns the run through 45 degrees, for turbo, intercooler, intake and coolant pipework. Match each internal diameter to the outside of the pipe it pushes over. For air, water and coolant; not for fuel or oil.
- 🌡️ -50°C TO +250°C RATED – stays flexible in heat and cold; 3.5 bar working, 10.5 bar burst, and resists ozone, UV and coolant so it won't harden or perish like ageing rubber.
- 🛡️ 4-PLY POLYESTER REINFORCED, SAE J20 R3 – 4 layers of polyester fabric in the 5.5mm wall hold the shape under boost pressure and vacuum, with a smooth bore for clean flow.
- 🔩 MATCHED ZINC CLIPS – one 70-90mm and one 60-80mm zinc plated worm drive hose clip sized for the 87/78mm outside diameter: push the part fully on, slide the clip over it and tighten with a flat screwdriver or nut driver.
Product description
45 Degree Silicone Elbow Reducer 76mm to 67mm Blue with 2 Hose Clips
A 45 degree reducing elbow from 76mm to 67mm internal diameter supplied with matching zinc plated worm drive hose clips, rated -50°C to +250°C. For air, water and coolant; not for fuel or oil.
- ✅ In the box: 1 x 45 degree reducing elbow from 76mm to 67mm internal diameter, 1 x 70-90mm zinc plated worm drive hose clip, 1 x 60-80mm zinc plated worm drive hose clip
- Size: 45 degree reducing elbow from 76mm to 67mm internal diameter, 87/78mm outside diameter, 5.5mm wall
- Construction: 4-ply polyester reinforced silicone, SAE J20 R3
- Pressure: 3.5 bar working, 10.5 bar burst
- Fitting: clean the pipe ends, push the part fully on and tighten one clip over each end; re-check once the engine has been up to temperature
Product details
| Brand | HOSES UK |
|---|---|
| Material | Silicone |
| Colour | Blue |
| Outside diameter | 87mm |
| Wall thickness | 5.5mm |
| Reinforcement | 4-ply polyester |
| Length | 300mm |
| Temperature range | -50°C TO +250°C |
| Maximum pressure | 10.5 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | HOSES UK |