45 Degree Silicone Elbow Reducer 42mm to 32mm Red with 2 Hose Clips

40-55mm & 32-45mm Zinc Clamps | -50 to +250°C | 51/41mm OD | 4.5mm Wall | Offset Turn + Step Down | Race-Style Gloss

Brand: HOSES UK
  • 51mm OD
  • 4.5mm wall
  • -50°C TO +250°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£2400

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
HOSES UK
Material
Silicone
Colour
Red
Outside diameter
51mm
Wall thickness
4.5mm
Length
300mm
Temperature range
-50°C TO +250°C

About this item

  • 📦 WHAT'S IN THE BOX – one 45 degree reducing elbow from 42mm to 32mm internal diameter, 51/41mm outside diameter, plus one 40-55mm and one 32-45mm zinc plated worm drive hose clip: the part and a clamp for each end in one order.
  • 🔧 JOINS TWO SIZES – steps a 42mm pipe down to 32mm and turns the run through 45 degrees, for turbo, intercooler, intake and coolant pipework. Match each internal diameter to the outside of the pipe it pushes over. For air, water and coolant; not for fuel or oil.
  • 🌡️ -50°C TO +250°C RATED – stays flexible in heat and cold, and resists ozone, UV and coolant so it won't harden or perish like ageing rubber.
  • 🛡️ SOFT SILICONE, SAE J20 R3 – 4.5mm wall silicone that stays soft and sealing in the engine bay and resists ozone, UV and coolant.
  • 🔩 MATCHED ZINC CLIPS – one 40-55mm and one 32-45mm zinc plated worm drive hose clip sized for the 51/41mm outside diameter: push the part fully on, slide the clip over it and tighten with a flat screwdriver or nut driver.

Product description

45 Degree Silicone Elbow Reducer 42mm to 32mm Red with 2 Hose Clips

A 45 degree reducing elbow from 42mm to 32mm internal diameter supplied with matching zinc plated worm drive hose clips, rated -50°C to +250°C. For air, water and coolant; not for fuel or oil.

  • ✅ In the box: 1 x 45 degree reducing elbow from 42mm to 32mm internal diameter, 1 x 40-55mm zinc plated worm drive hose clip, 1 x 32-45mm zinc plated worm drive hose clip
  • Size: 45 degree reducing elbow from 42mm to 32mm internal diameter, 51/41mm outside diameter, 4.5mm wall
  • Fitting: clean the pipe ends, push the part fully on and tighten one clip over each end; re-check once the engine has been up to temperature

Product details

BrandHOSES UK
MaterialSilicone
ColourRed
Outside diameter51mm
Wall thickness4.5mm
Length300mm
Temperature range-50°C TO +250°C
ShapeCircular
Pack quantity1
ManufacturerHOSES UK

Products related to this item