45 Degree Silicone Elbow Hose 9.5mm (3/8") ID Blue + 2 Hose Clips

Pair of 13-20mm Zinc Clamps | -60 to +180°C | 18.5mm OD | 4.5mm Wall, 3 Ply | 35 Bar Burst | Offset Routing | Show-Car Gloss

Brand: HOSES UK
  • 18.5mm OD
  • 4.5mm wall · 3-ply
  • -60°C TO +180°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£2000

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
HOSES UK
Material
Silicone
Colour
Blue
Outside diameter
18.5mm
Wall thickness
4.5mm
Reinforcement
3-ply polyester
Length
300mm
Temperature range
-60°C TO +180°C
Maximum pressure
35 bar

About this item

  • 📦 WHAT'S IN THE BOX – one 45 degree silicone elbow, 9.5mm (3/8") internal diameter x 18.5mm outside diameter, plus two 13-20mm zinc plated worm drive hose clips: the part and a clamp for each end in one order.
  • 🔧 45 DEGREE BEND – a moulded 45 degree elbow makes a gentle offset turn without the kinking you get from bending straight hose. For air, water and coolant; not for fuel or oil.
  • 🌡️ -60°C TO +180°C RATED – stays flexible in heat and cold; 11.7 bar working, 35 bar burst, and resists ozone, UV and coolant so it won't harden or perish like ageing rubber.
  • 🛡️ 3-PLY POLYESTER REINFORCED, SAE J20 R3 – 3 layers of polyester fabric in the 4.5mm wall hold the shape under boost pressure and vacuum, with a smooth bore for clean flow.
  • 🔩 MATCHED ZINC CLIPS – two 13-20mm zinc plated worm drive hose clips sized for the 18.5mm outside diameter: push the part fully on, slide the clip over it and tighten with a flat screwdriver or nut driver.

Product description

45 Degree Silicone Elbow Hose 9.5mm (3/8") ID Blue + 2 Hose Clips

A 45 degree silicone elbow supplied with matching zinc plated worm drive hose clips, rated -60°C to +180°C. For air, water and coolant; not for fuel or oil.

  • ✅ In the box: 1 x 45 degree silicone elbow, 2 x 13-20mm zinc plated worm drive hose clips
  • Size: 45 degree silicone elbow, 9.5mm (3/8") internal diameter x 18.5mm outside diameter, 4.5mm wall
  • Construction: 3-ply polyester reinforced silicone, SAE J20 R3
  • Pressure: 11.7 bar working, 35 bar burst
  • Fitting: clean the pipe ends, push the part fully on and tighten one clip over each end; re-check once the engine has been up to temperature

Product details

BrandHOSES UK
MaterialSilicone
ColourBlue
Outside diameter18.5mm
Wall thickness4.5mm
Reinforcement3-ply polyester
Length300mm
Temperature range-60°C TO +180°C
Maximum pressure35 bar
ShapeCircular
Pack quantity1
ManufacturerHOSES UK

Products related to this item