45 Degree Silicone Elbow Hose 57mm ID Red, Intercooler Pipe + 2 Hose Clips

Pair of 55-70mm Zinc Clamps | -60 to +180°C | 68mm OD | 5.5mm Wall, 4 Ply | 13 Bar Burst | Offset Routing | Race-Style Gloss

Brand: HOSES UK
  • 68mm OD
  • 5.5mm wall · 4-ply
  • -60°C TO +180°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£2495

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
HOSES UK
Material
Silicone
Colour
Red
Outside diameter
68mm
Wall thickness
5.5mm
Reinforcement
4-ply polyester
Length
300mm
Temperature range
-60°C TO +180°C
Maximum pressure
13 bar

About this item

  • 📦 WHAT'S IN THE BOX – one 45 degree silicone elbow, 57mm (2 1/4") internal diameter x 68mm outside diameter, plus two 55-70mm zinc plated worm drive hose clips: the part and a clamp for each end in one order.
  • 🔧 45 DEGREE BEND – a moulded 45 degree elbow makes a gentle offset turn without the kinking you get from bending straight hose; made for intercooler pipework. For air, water and coolant; not for fuel or oil.
  • 🌡️ -60°C TO +180°C RATED – stays flexible in heat and cold; 4.3 bar working, 13 bar burst, and resists ozone, UV and coolant so it won't harden or perish like ageing rubber.
  • 🛡️ 4-PLY POLYESTER REINFORCED, SAE J20 R3 – 4 layers of polyester fabric in the 5.5mm wall hold the shape under boost pressure and vacuum, with a smooth bore for clean flow.
  • 🔩 MATCHED ZINC CLIPS – two 55-70mm zinc plated worm drive hose clips sized for the 68mm outside diameter: push the part fully on, slide the clip over it and tighten with a flat screwdriver or nut driver.

Product description

45 Degree Silicone Elbow Hose 57mm ID Red, Intercooler Pipe + 2 Hose Clips

A 45 degree silicone elbow supplied with matching zinc plated worm drive hose clips, rated -60°C to +180°C. For air, water and coolant; not for fuel or oil.

  • ✅ In the box: 1 x 45 degree silicone elbow, 2 x 55-70mm zinc plated worm drive hose clips
  • Size: 45 degree silicone elbow, 57mm (2 1/4") internal diameter x 68mm outside diameter, 5.5mm wall
  • Construction: 4-ply polyester reinforced silicone, SAE J20 R3
  • Pressure: 4.3 bar working, 13 bar burst
  • Fitting: clean the pipe ends, push the part fully on and tighten one clip over each end; re-check once the engine has been up to temperature

Product details

BrandHOSES UK
MaterialSilicone
ColourRed
Outside diameter68mm
Wall thickness5.5mm
Reinforcement4-ply polyester
Length300mm
Temperature range-60°C TO +180°C
Maximum pressure13 bar
ShapeCircular
Pack quantity1
ManufacturerHOSES UK

Products related to this item