40mm Push Fit Y Piece Hose Connector + 3 Worm Drive Clips White

ABS, made in the UK | Zinc plated steel clamps included | Smooth legs, 60° branch | -20°C to +105°C | 2.5mm wall

Brand: AP Automotive
  • 40mm ID
  • 2.5mm wall
  • -20°C to +105°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£1145

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
AP Automotive
Material
ABS Plastic
Colour
White
Inside diameter
40mm
Wall thickness
2.5mm
Temperature range
-20°C to +105°C

About this item

  • 🔀 SPLITS ONE LINE INTO TWO - a Y shaped three way fitting with one main leg and two branches set 60° apart. Split one hose or duct into two, or merge two into one, with a gentle split that restricts flow less than a 90° T piece.
  • 📏 SMOOTH EQUAL LEGS - all three legs share the same outside diameter and the same push-on length, so one hose size fits every leg. Slide the hose over the leg up to the junction and secure it with the worm drive clip included; a chamfered lead-in eases fitting and small raised tabs help hold the hose and clip.
  • 💪 TOUGH ABS PLASTIC - 3D printed in the UK from rigid, lightweight ABS (ISO/ASTM 52900) with a 2.5mm wall and a filleted, reinforced junction. Rated -20°C to +105°C and resists moisture where metal fittings corrode.
  • 🔩 CLIPS INCLUDED - includes 3 x zinc plated worm drive clips, 35-50mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 50mm down to 35mm, to suit a 40mm ID hose with a thin or thick wall. Tighten with a screwdriver for an even, leak-free grip.
  • ⚪ THIS KIT: 1 x 40mm white Y piece connector + 3 x 35-50mm zinc plated worm drive clips - for heater ducting in vans and campers, breather and vacuum lines, coolant and washer overflow, catch tanks, drain and condensate lines, garden hose and irrigation, pond and aquarium pipework, and workshop air lines.

Product description

Push Fit Y Piece Hose Connector with Worm Drive Clips - this kit includes 1 x 40mm white Y piece connector and 3 x 35-50mm zinc plated worm drive hose clips, so everything needed for the joint arrives together.

  • SPLITS ONE LINE INTO TWO - a Y shaped three way fitting with one main leg and two branches set 60° apart. Split one hose or duct into two, or merge two into one, with a gentle split that restricts flow less than a 90° T piece.
  • SMOOTH EQUAL LEGS - all three legs share the same outside diameter and the same push-on length, so one hose size fits every leg. Slide the hose over the leg up to the junction and secure it with the worm drive clip included; a chamfered lead-in eases fitting and small raised tabs help hold the hose and clip.
  • TOUGH ABS PLASTIC - 3D printed in the UK from rigid, lightweight ABS (ISO/ASTM 52900) with a 2.5mm wall and a filleted, reinforced junction. Rated -20°C to +105°C and resists moisture where metal fittings corrode.
  • CLIPS INCLUDED - includes 3 x zinc plated worm drive clips, 35-50mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 50mm down to 35mm, to suit a 40mm ID hose with a thin or thick wall. Tighten with a screwdriver for an even, leak-free grip.
  • THIS KIT: 1 x 40mm white Y piece connector + 3 x 35-50mm zinc plated worm drive clips - for heater ducting in vans and campers, breather and vacuum lines, coolant and washer overflow, catch tanks, drain and condensate lines, garden hose and irrigation, pond and aquarium pipework, and workshop air lines.

Fitting: measure the internal diameter of each hose, fit each hose fully onto the fitting, slide a clip over each hose end and tighten it with a screwdriver.

Product details

BrandAP Automotive
MaterialABS Plastic
ColourWhite
Inside diameter40mm
Wall thickness2.5mm
Temperature range-20°C to +105°C
ShapeCircular
Pack quantity1
Manufacturerap automotive

Products related to this item