35mm Plastic Blanking End Cap Bung + 1 Worm Drive Clip Red

Single 32-45mm Zinc Clamp | Seals 35mm ID Hose | -20°C to +105°C | 30mm Deep | ABS 3D Printed | Signal Tone

Brand: AutoSiliconeHoses.com
  • -20°C to +105°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£1245

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
AutoSiliconeHoses.com
Material
ABS Plastic
Colour
Red
Temperature range
-20°C to +105°C

About this item

  • 📦 WHAT'S IN THE BOX – 1 x 35mm (1-3/8") red plastic blanking end cap bung plus 1 x 32-45mm zinc plated worm drive hose clip, so the bung is clamped in the hose and can't push or work out.
  • 🔒 SEALS A 35mm ID HOSE – push the bung into the end of a 35mm internal diameter hose or pipe to blank it off, keep dirt out and stop drips; then clamp the hose over it with the clip included.
  • 💪 TOUGH ABS – high quality red ABS plastic, 3D printed, resistant to cracking, corrosion and temperature changes, rated -20°C to +105°C.
  • 🌊 VERSATILE USE – for water, air and non-aggressive chemical systems in home, garden, pond, irrigation, plumbing and workshop setups. 30mm deep.
  • 🔩 MATCHED ZINC CLIP – the 32-45mm W1 zinc plated worm drive clip suits a 35mm ID hose with a wall of about 0.5-5mm: slide the clip over the hose, push the bung fully in and tighten over the bung with a screwdriver.

Product description

35mm Plastic Blanking End Cap Bung + 1 Worm Drive Clip Red

A 35mm red plastic blanking end cap bung supplied with a matching zinc plated worm drive hose clip. ABS plastic, 3D printed, 30mm deep, rated -20°C to +105°C, for water, air and non-aggressive chemicals.

  • ✅ In the box: 1 x 35mm plastic blanking end cap bung and 1 x 32-45mm zinc plated worm drive hose clip
  • Fits: 35mm internal diameter hose and pipe
  • Fitting: slide the clip over the hose, push the bung fully into the hose end and tighten the clip over the bung

Product details

BrandAutoSiliconeHoses.com
MaterialABS Plastic
ColourRed
Temperature range-20°C to +105°C
ShapeCircular
Pack quantity1
ManufacturerAuto Silicone Hoses

Products related to this item