32mm Straight Barbed Hose Joiner + 2 Worm Drive Clips Red
Two 32-45mm zinc plated clamps | Fits walls up to 6.5mm | High-visibility colour coding | -20°C to +105°C | 75mm long
Brand: AP Automotive- 32mm ID
- 32mm OD
- 2mm wall
- -20°C to +105°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AP Automotive
- Material
- Plastic
- Colour
- Red
- Inside diameter
- 32mm
- Outside diameter
- 32mm
- Wall thickness
- 2mm
- Temperature range
- -20°C to +105°C
About this item
- 🔗 JOINS TWO 32mm HOSES - connects two hoses with a 32mm (1 1/4 inch) internal diameter end to end in a straight line, to repair a split hose or extend a run. Push each end into its hose up to the centre collar and secure with the worm drive clips included.
- 📏 BARBED BOTH ENDS - about 75mm (3 inch) long, with identical ribbed barbs on each end that grip the inside of the hose, and a raised centre collar so each hose stops at the right depth. No adhesive or sealant needed.
- 💪 TOUGH ABS PLASTIC - made in the UK from rigid, lightweight 3D-printed ABS with a matte finish and a 2mm wall; resists cracking, impact and UV for outdoor use. Rated -20°C to +105°C; not for high-temperature lines.
- 🔩 CLIPS INCLUDED - includes 2 x zinc plated worm drive clips, 32-45mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 45mm down to 32mm, to suit a 32mm ID hose with a wall of up to 6.5mm. Tighten with a screwdriver for an even, leak-free grip.
- 🔴 THIS KIT: 1 x 32mm red straight joiner + 2 x 32-45mm zinc plated worm drive clips - for pond pump and filter hose, water features, garden irrigation and hose repairs, water butts and water transfer, aquariums, automotive breather and vacuum lines, and workshop hoses.
Product description
Straight Barbed Hose Joiner with Worm Drive Clips - this kit includes 1 x 32mm red straight joiner and 2 x 32-45mm zinc plated worm drive hose clips, so everything needed for the joint arrives together.
- JOINS TWO 32mm HOSES - connects two hoses with a 32mm (1 1/4 inch) internal diameter end to end in a straight line, to repair a split hose or extend a run. Push each end into its hose up to the centre collar and secure with the worm drive clips included.
- BARBED BOTH ENDS - about 75mm (3 inch) long, with identical ribbed barbs on each end that grip the inside of the hose, and a raised centre collar so each hose stops at the right depth. No adhesive or sealant needed.
- TOUGH ABS PLASTIC - made in the UK from rigid, lightweight 3D-printed ABS with a matte finish and a 2mm wall; resists cracking, impact and UV for outdoor use. Rated -20°C to +105°C; not for high-temperature lines.
- CLIPS INCLUDED - includes 2 x zinc plated worm drive clips, 32-45mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 45mm down to 32mm, to suit a 32mm ID hose with a wall of up to 6.5mm. Tighten with a screwdriver for an even, leak-free grip.
- THIS KIT: 1 x 32mm red straight joiner + 2 x 32-45mm zinc plated worm drive clips - for pond pump and filter hose, water features, garden irrigation and hose repairs, water butts and water transfer, aquariums, automotive breather and vacuum lines, and workshop hoses.
Fitting: measure the internal diameter of each hose, push each hose fully onto the joiner up to the centre collar, slide a clip over each hose end and tighten it with a screwdriver.
Product details
| Brand | AP Automotive |
|---|---|
| Material | Plastic |
| Colour | Red |
| Inside diameter | 32mm |
| Outside diameter | 32mm |
| Wall thickness | 2mm |
| Temperature range | -20°C to +105°C |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | AP Automotive |