30mm Push Fit Y Piece Hose Connector + 3 Worm Drive Clips White
ABS, made in the UK | Zinc plated steel clamps included | Smooth legs, 60° branch | -20°C to +105°C | 2.5mm wall
Brand: AP Automotive- 30mm ID
- 2.5mm wall
- -20°C to +105°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AP Automotive
- Material
- ABS Plastic
- Colour
- White
- Inside diameter
- 30mm
- Wall thickness
- 2.5mm
- Temperature range
- -20°C to +105°C
About this item
- 🔀 SPLITS ONE LINE INTO TWO - a Y shaped three way fitting with one main leg and two branches set 60° apart. Split one hose or duct into two, or merge two into one, with a gentle split that restricts flow less than a 90° T piece.
- 📏 SMOOTH EQUAL LEGS - all three legs share the same outside diameter and the same push-on length, so one hose size fits every leg. Slide the hose over the leg up to the junction and secure it with the worm drive clip included; a chamfered lead-in eases fitting and small raised tabs help hold the hose and clip.
- 💪 TOUGH ABS PLASTIC - 3D printed in the UK from rigid, lightweight ABS (ISO/ASTM 52900) with a 2.5mm wall and a filleted, reinforced junction. Rated -20°C to +105°C and resists moisture where metal fittings corrode.
- 🔩 CLIPS INCLUDED - includes 3 x zinc plated worm drive clips, 32-45mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 45mm down to 32mm, to suit a 30mm ID hose with a thin or thick wall. Tighten with a screwdriver for an even, leak-free grip.
- ⚪ THIS KIT: 1 x 30mm white Y piece connector + 3 x 32-45mm zinc plated worm drive clips - for heater ducting in vans and campers, breather and vacuum lines, coolant and washer overflow, catch tanks, drain and condensate lines, garden hose and irrigation, pond and aquarium pipework, and workshop air lines.
Product description
Push Fit Y Piece Hose Connector with Worm Drive Clips - this kit includes 1 x 30mm white Y piece connector and 3 x 32-45mm zinc plated worm drive hose clips, so everything needed for the joint arrives together.
- SPLITS ONE LINE INTO TWO - a Y shaped three way fitting with one main leg and two branches set 60° apart. Split one hose or duct into two, or merge two into one, with a gentle split that restricts flow less than a 90° T piece.
- SMOOTH EQUAL LEGS - all three legs share the same outside diameter and the same push-on length, so one hose size fits every leg. Slide the hose over the leg up to the junction and secure it with the worm drive clip included; a chamfered lead-in eases fitting and small raised tabs help hold the hose and clip.
- TOUGH ABS PLASTIC - 3D printed in the UK from rigid, lightweight ABS (ISO/ASTM 52900) with a 2.5mm wall and a filleted, reinforced junction. Rated -20°C to +105°C and resists moisture where metal fittings corrode.
- CLIPS INCLUDED - includes 3 x zinc plated worm drive clips, 32-45mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 45mm down to 32mm, to suit a 30mm ID hose with a thin or thick wall. Tighten with a screwdriver for an even, leak-free grip.
- THIS KIT: 1 x 30mm white Y piece connector + 3 x 32-45mm zinc plated worm drive clips - for heater ducting in vans and campers, breather and vacuum lines, coolant and washer overflow, catch tanks, drain and condensate lines, garden hose and irrigation, pond and aquarium pipework, and workshop air lines.
Fitting: measure the internal diameter of each hose, fit each hose fully onto the fitting, slide a clip over each hose end and tighten it with a screwdriver.
Product details
| Brand | AP Automotive |
|---|---|
| Material | ABS Plastic |
| Colour | White |
| Inside diameter | 30mm |
| Wall thickness | 2.5mm |
| Temperature range | -20°C to +105°C |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | ap automotive |