25mm Wire Reinforced Radiator Hose 2m with 2 Hose Clips

Pair of 30-40mm Zinc Clamps | -40°C to +120°C | 36mm OD | 6.6ft Length | Bends Without Kinking

Brand: AP Automotive
  • 25mm ID
  • 36mm OD
  • -40°C to +120°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£2995

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
AP Automotive
Material
EPDM Rubber
Colour
Black
Inside diameter
25mm
Outside diameter
36mm
Length
2m
Temperature range
-40°C to +120°C

About this item

  • 📦 WHAT'S IN THE BOX – one continuous 2 metres (6.6ft) of wire reinforced radiator hose, 25mm (1") internal diameter, 36mm outside diameter, plus two 30-40mm zinc plated worm drive hose clips: the hose and both clamps for the job in one order.
  • 🛡️ BUILT TO LAST – flexible black EPDM rubber hose with an embedded steel wire helix and textile braid reinforcement, so it bends round corners without kinking or collapsing.
  • 🌡️ -40°C TO +120°C RATED – rated -40°C to +120°C. Suits radiator, coolant and heater lines where the hose has to curve, on cars, vans, tractors, plant and stationary engines.
  • ✂️ CUT TO FIT – trim the hose square with a sharp blade, push it fully over the pipe stub and fit a clip over each end. For coolant, antifreeze, water and air; not for fuel or oil.
  • 🔩 MATCHED ZINC CLIPS – the 30-40mm W1 zinc plated worm drive clips are sized for the 36mm outside diameter, so they slide over the hose end and close down tight with a flat screwdriver or nut driver.

Product description

25mm Wire Reinforced Radiator Hose 2m with 2 Hose Clips

A wire reinforced radiator hose supplied with two matching zinc plated worm drive hose clips. Flexible black EPDM rubber hose with an embedded steel wire helix and textile braid reinforcement, so it bends round corners without kinking or collapsing. Rated -40°C to +120°C.

  • ✅ In the box: 2m of 25mm bore hose and 2 x 30-40mm zinc plated worm drive hose clips
  • Size: 25mm (1") ID x 36mm OD
  • Uses: radiator, coolant and heater lines where the hose has to curve, on cars, vans, tractors, plant and stationary engines
  • Cut square to length and secure each end with one of the two clips supplied
  • For coolant, antifreeze, water and air. Not for fuel or oil

Product details

BrandAP Automotive
MaterialEPDM Rubber
ColourBlack
Inside diameter25mm
Outside diameter36mm
Length2m
Temperature range-40°C to +120°C
ShapeCircular
Pack quantity1
ManufacturerAP Automotive

Products related to this item