25mm (1") ID Polyester Reinforced Clear PVC Hose 2m with 2 Hose Clips

10°C to +65°C (Peak 70°C) | Pair of 25-35mm Stainless Clamps | 6.6ft for Short Connections | Garden, Workshop & Farm

Brand: AutoSiliconeHoses.com
  • 25mm ID
  • 31mm OD
  • 3mm wall
  • -10°C to +65°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£2045

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
AutoSiliconeHoses.com
Material
Polyvinyl Chloride (PVC)
Colour
Clear
Inside diameter
25mm
Outside diameter
31mm
Wall thickness
3mm
Length
2m
Temperature range
-10°C to +65°C
Maximum pressure
5 bar

About this item

  • 📦 IN THE BOX – a 2 metre (6.6 ft) length of clear braided PVC hose, 25mm (1") ID x 31mm OD with a 3mm wall, plus two 25-35mm stainless steel worm drive hose clips sized for its 31mm outside diameter.
  • 🌿 GARDEN, WORKSHOP & FARM – the hose and its clips arrive in one order, so the line can go in the day it lands. At 25mm bore it suits pump outlets, water transfer, drainage, agricultural and industrial fluid lines.
  • 🔍 CLEAR PVC WITH TRIPLE POLYESTER BRAID – Soft PVC inner and outer layers with a triple polyester yarn reinforcement resist kinking and stretching under pressure, and you can see water moving and spot air locks or debris at a glance. This 2m length is ideal for short connections between pump, filter and outlet.
  • 💪 5 BAR WORKING PRESSURE – 15 bar burst (3:1 safety margin) at 25mm bore, minimum bend radius 186mm. Rated -10°C to +65°C (peak +70°C) for indoor and outdoor use.
  • 🔩 MATCHED STAINLESS CLIPS – the 25-35mm stainless steel worm drive clips put the 31mm OD in the middle to upper part of their range, so they slide on and still close down tight, and they won't rust outdoors or around water. Push the hose fully onto the fitting and tighten one clip over each end.

Product description

25mm (1") ID Polyester Reinforced Clear PVC Hose 2m with 2 Hose Clips

Flexible, transparent PVC hose with soft PVC inner and outer layers and a triple polyester yarn braid, supplied with two stainless steel worm drive hose clips sized for it.

  • In the box: 2m of 25mm (1") clear braided PVC hose and 2 x 25-35mm stainless steel worm drive hose clips.
  • This size: 25mm (1") Inside Diameter, 31mm Outside Diameter, 3mm wall, 2m long.
  • Pressure: 5 bar working, 15 bar burst (3:1 safety margin).
  • Bend radius: 186mm minimum.
  • Temperature: -10°C to +65°C (peak +70°C).
  • Standard: ISO 5774:2016 Type A.
  • Media: water, air and light chemicals.

Fitting: match the hose bore to your hose tail or barb (25mm), warm the end in hot water to ease it on, push it fully home and tighten one clip over each end. The clips are sized for the 31mm outside diameter.

Product details

BrandAutoSiliconeHoses.com
MaterialPolyvinyl Chloride (PVC)
ColourClear
Inside diameter25mm
Outside diameter31mm
Wall thickness3mm
Length2m
Temperature range-10°C to +65°C
Maximum pressure5 bar
ShapeRound
Pack quantity1
ManufacturerAuto Silicone Hoses

Products related to this item