25mm (1") ID 90 Degree Rubber Elbow Hose + 2 Hose Clips, Radiator Kit
30°C to +125°C (Peak +145°C) | 34mm OD | Zinc Worm Drive 32-45mm | Tight Right-Angle Turns | Single Repair | 4.5mm Wall
Brand: AutoSiliconeHoses.com- 25mm ID
- 34mm OD
- 4.5mm wall
- -30°C to +125°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit$26.00
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips$35.00
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers$73.00
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat$20.00
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- EPDM Rubber
- Colour
- Black
- Inside diameter
- 25mm
- Outside diameter
- 34mm
- Wall thickness
- 4.5mm
- Temperature range
- -30°C to +125°C
- Maximum pressure
- 10 bar
About this item
- 🔧 1 ELBOW + 2 CLIP KIT - 1 x 25mm (1") ID 90° rubber elbow with 2 zinc-plated worm drive hose clips (32-45mm), two per elbow, sized to the 34mm outside diameter. Everything needed to fit, in one order.
- 🌡️ HEAT RESISTANT EPDM - Smooth EPDM rubber inside and out, rated -30°C to +125°C with peaks to +145°C, resistant to heat, ozone and weathering.
- 💪 FIBRE REINFORCED - One ply of high tensile fibre yarn in a 4.5mm wall: 10 bar working pressure, 30 bar burst (3:1 safety factor). Made to SAE J20R3.
- 📏 LONG 150MM LEGS - Each leg is 150mm (6"), 300mm (12") overall, with plenty of room for a clip on each end and to trim to fit.
- 🚗 COOLANT, WATER & AIR - 90° right-angle connections on radiator and heater hoses, engine cooling, water and air lines on cars, vans, tractors, plant and marine engines. Not for fuel lines.
Product description
25mm (1") 90 Degree Rubber Elbow Hose + Hose Clip Kit
- 1 x 90° moulded EPDM rubber elbow, 25mm ID, 34mm OD, 4.5mm wall
- 2 x zinc-plated worm drive hose clips, 32-45mm (two per elbow)
- -30°C to +125°C, peak +145°C; 10 bar working, 30 bar burst; SAE J20R3
- 150mm legs, 300mm overall
A ready-to-fit kit for coolant, water and air connections that need to turn a corner: radiator and heater hoses, engine cooling on cars, vans, tractors, plant and marine engines, and workshop repairs. Push the hose over the leg, position a clip near each end and tighten. Not suitable for fuel lines.
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | EPDM Rubber |
| Colour | Black |
| Inside diameter | 25mm |
| Outside diameter | 34mm |
| Wall thickness | 4.5mm |
| Temperature range | -30°C to +125°C |
| Maximum pressure | 10 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | Auto Silicone Hoses |