22mm (7/8") ID 90 Degree Rubber Elbow Hose + 2 Hose Clips, Radiator Kit

30°C to +125°C (Peak +145°C) | 31mm OD | Zinc Worm Drive 25-35mm | Tight Right-Angle Turns | Single Repair | 4.5mm Wall

Brand: AutoSiliconeHoses.com
  • 22mm ID
  • 31mm OD
  • 4.5mm wall
  • -30°C to +125°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£1195

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
AutoSiliconeHoses.com
Material
EPDM Rubber
Colour
Black
Inside diameter
22mm
Outside diameter
31mm
Wall thickness
4.5mm
Temperature range
-30°C to +125°C
Maximum pressure
10 bar

About this item

  • 🔧 1 ELBOW + 2 CLIP KIT - 1 x 22mm (7/8") ID 90° rubber elbow with 2 zinc-plated worm drive hose clips (25-35mm), two per elbow, sized to the 31mm outside diameter. Everything needed to fit, in one order.
  • 🌡️ HEAT RESISTANT EPDM - Smooth EPDM rubber inside and out, rated -30°C to +125°C with peaks to +145°C, resistant to heat, ozone and weathering.
  • 💪 FIBRE REINFORCED - One ply of high tensile fibre yarn in a 4.5mm wall: 10 bar working pressure, 30 bar burst (3:1 safety factor). Made to SAE J20R3.
  • 📏 LONG 150MM LEGS - Each leg is 150mm (6"), 300mm (12") overall, with plenty of room for a clip on each end and to trim to fit.
  • 🚗 COOLANT, WATER & AIR - 90° right-angle connections on radiator and heater hoses, engine cooling, water and air lines on cars, vans, tractors, plant and marine engines. Not for fuel lines.

Product description

22mm (7/8") 90 Degree Rubber Elbow Hose + Hose Clip Kit

  • 1 x 90° moulded EPDM rubber elbow, 22mm ID, 31mm OD, 4.5mm wall
  • 2 x zinc-plated worm drive hose clips, 25-35mm (two per elbow)
  • -30°C to +125°C, peak +145°C; 10 bar working, 30 bar burst; SAE J20R3
  • 150mm legs, 300mm overall

A ready-to-fit kit for coolant, water and air connections that need to turn a corner: radiator and heater hoses, engine cooling on cars, vans, tractors, plant and marine engines, and workshop repairs. Push the hose over the leg, position a clip near each end and tighten. Not suitable for fuel lines.

Product details

BrandAutoSiliconeHoses.com
MaterialEPDM Rubber
ColourBlack
Inside diameter22mm
Outside diameter31mm
Wall thickness4.5mm
Temperature range-30°C to +125°C
Maximum pressure10 bar
ShapeCircular
Pack quantity1
ManufacturerAuto Silicone Hoses

Products related to this item