2 Pack 38mm to 22mm Straight Hose Reducer + 4 Worm Drive Clips Red
ABS, made in the UK | Zinc plated steel clamps included | 75mm long, ribbed grip both ends | -20°C to +105°C | 2mm wall
Brand: AP Automotive- -20°C to +105°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AP Automotive
- Material
- ABS Plastic
- Colour
- Red
- Temperature range
- -20°C to +105°C
About this item
- 🔗 JOINS TWO HOSE SIZES - connects a 38mm internal diameter hose to a 22mm hose in a straight line. Push each end into its hose up to the centre collar and secure with the worm drive clips included for a firm, leak-free joint.
- 📏 RIBBED BARBS BOTH ENDS - about 75mm (3 inch) long, with ribbed barbs on each spigot that grip the inside of the hose, and a raised centre collar so each hose stops at the right depth.
- 💪 TOUGH ABS PLASTIC - made in the UK from rigid, lightweight ABS with a matte finish and a 2mm wall. Rated -20°C to +105°C; not for high-temperature lines.
- 🔩 CLIPS INCLUDED - includes 4 x zinc plated worm drive clips: 2 x 35-50mm for the 38mm hose and 2 x 25-35mm for the 22mm hose. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip is sized to the hose on its end of the fitting. Tighten with a screwdriver for an even, leak-free grip.
- 🔴 THIS KIT: 2 x 38mm to 22mm red straight reducers + 2 x 35-50mm + 2 x 25-35mm zinc plated worm drive clips - for pond pump and filter hose, water butts and irrigation, aquariums, marine, automotive breather, vacuum and coolant overflow lines, and workshop hoses.
Product description
Straight Hose Reducer with Worm Drive Clips - this kit includes 2 x 38mm to 22mm red straight reducers and 2 x 35-50mm + 2 x 25-35mm zinc plated worm drive hose clips, so everything needed for the joint arrives together.
- JOINS TWO HOSE SIZES - connects a 38mm internal diameter hose to a 22mm hose in a straight line. Push each end into its hose up to the centre collar and secure with the worm drive clips included for a firm, leak-free joint.
- RIBBED BARBS BOTH ENDS - about 75mm (3 inch) long, with ribbed barbs on each spigot that grip the inside of the hose, and a raised centre collar so each hose stops at the right depth.
- TOUGH ABS PLASTIC - made in the UK from rigid, lightweight ABS with a matte finish and a 2mm wall. Rated -20°C to +105°C; not for high-temperature lines.
- CLIPS INCLUDED - includes 4 x zinc plated worm drive clips: 2 x 35-50mm for the 38mm hose and 2 x 25-35mm for the 22mm hose. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip is sized to the hose on its end of the fitting. Tighten with a screwdriver for an even, leak-free grip.
- THIS KIT: 2 x 38mm to 22mm red straight reducers + 2 x 35-50mm + 2 x 25-35mm zinc plated worm drive clips - for pond pump and filter hose, water butts and irrigation, aquariums, marine, automotive breather, vacuum and coolant overflow lines, and workshop hoses.
Fitting: measure the internal diameter of each hose, fit each hose fully onto the fitting, slide a clip over each hose end and tighten it with a screwdriver.
Product details
| Brand | AP Automotive |
|---|---|
| Material | ABS Plastic |
| Colour | Red |
| Temperature range | -20°C to +105°C |
| Shape | Circular |
| Pack quantity | 2 |
| Manufacturer | ap automotive |