2 Pack 38mm Hollow Blanking End Cap Bung + 2 Worm Drive Clips Blue
Two 35-50mm Zinc Clamps | Seals 38mm ID Hose | -20°C to +105°C | 25mm Insert, 30mm Overall | ABS Plastic | Cobalt Tone
Brand: AutoSiliconeHoses.com- -20°C to +105°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- ABS Plastic
- Colour
- Blue
- Temperature range
- -20°C to +105°C
About this item
- 📦 WHAT'S IN THE BOX – 2 x 38mm (1 1/2") blue hollow blanking end cap bungs plus 2 x 35-50mm zinc plated worm drive hose clips: one clip for every bung, so each one is clamped in its hose and can't push or work out.
- 🔒 SEALS A 38mm ID HOSE – push the bung into the end of a 38mm internal diameter hose or pipe to blank it off, keep dirt out and stop drips; then clamp the hose over it with the clip included.
- 💪 ABS PLASTIC – made from acrylonitrile butadiene styrene (ABS) for durability; light in weight and reusable, rated -20°C to +105°C.
- 📏 25MM INSERT, 30MM OVERALL – a 25mm insert section and 30mm overall length for a secure hold. Do not use in pressure applications.
- 🔩 MATCHED ZINC CLIPS – the 35-50mm W1 zinc plated worm drive clips suit a 38mm ID hose with a wall of about 0.5-6mm: slide the clip over the hose, push the bung fully in and tighten over the bung with a screwdriver.
Product description
2 Pack 38mm Hollow Blanking End Cap Bung + 2 Worm Drive Clips Blue
2 x 38mm blue hollow blanking end cap bungs supplied with matching zinc plated worm drive hose clips, one for every bung. ABS plastic, 25mm insert section and 30mm overall, rated -20°C to +105°C, reusable. Not for pressurised systems.
- ✅ In the box: 2 x 38mm hollow blanking end cap bungs and 2 x 35-50mm zinc plated worm drive hose clips
- Fits: 38mm internal diameter hose and pipe
- Fitting: slide the clip over the hose, push the bung fully into the hose end and tighten the clip over the bung
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | ABS Plastic |
| Colour | Blue |
| Temperature range | -20°C to +105°C |
| Shape | Circular |
| Pack quantity | 2 |
| Manufacturer | Auto Silicone Hoses |