2 Pack 19mm Corrugated Pond Hose Joiner + 4 Worm Drive Clips Blue
20°C to +105°C | Zinc plated steel clamps included | Tough ABS Plastic | 100mm Overall Length | Discreet Dark Finish
Brand: AutoSiliconeHoses.com- 19mm ID
- 19mm OD
- 2.5mm wall
- -20°C to +105°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- ABS Filament
- Colour
- Blue
- Inside diameter
- 19mm
- Outside diameter
- 19mm
- Wall thickness
- 2.5mm
- Temperature range
- -20°C to +105°C
About this item
- 🔗 CORRUGATED POND HOSE JOINER - a 19mm outside diameter male joiner that fits 19mm internal diameter PVC corrugated pond hose. Push one half into each hose end and tighten the worm drive clips included for a tight, dependable seal.
- 📏 100MM OVERALL LENGTH - a straight male coupling with a raised centre collar, designed specifically to fit PVC corrugated pond hose and to join circular ducts or other female fittings.
- 💪 TOUGH ABS PLASTIC - 3D printed from high quality ABS, rated -20°C to +105°C, built to withstand wear, tear and outdoor use.
- 🔩 CLIPS INCLUDED - includes 4 x zinc plated worm drive clips, 22-30mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 30mm down to 22mm, to suit a 19mm ID hose with a wall of about 1.5-5.5mm. Tighten with a screwdriver for an even, leak-free grip.
- 🔵 THIS KIT: 2 x 19mm blue corrugated pond hose joiners + 4 x 22-30mm zinc plated worm drive clips - for pond pumps and filters, fountains, waterfalls and water features, koi ponds and garden hose runs.
Product description
Corrugated Pond Hose Joiner with Worm Drive Clips - this kit includes 2 x 19mm blue corrugated pond hose joiners and 4 x 22-30mm zinc plated worm drive hose clips, so everything needed for the joint arrives together.
- CORRUGATED POND HOSE JOINER - a 19mm outside diameter male joiner that fits 19mm internal diameter PVC corrugated pond hose. Push one half into each hose end and tighten the worm drive clips included for a tight, dependable seal.
- 100MM OVERALL LENGTH - a straight male coupling with a raised centre collar, designed specifically to fit PVC corrugated pond hose and to join circular ducts or other female fittings.
- TOUGH ABS PLASTIC - 3D printed from high quality ABS, rated -20°C to +105°C, built to withstand wear, tear and outdoor use.
- CLIPS INCLUDED - includes 4 x zinc plated worm drive clips, 22-30mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 30mm down to 22mm, to suit a 19mm ID hose with a wall of about 1.5-5.5mm. Tighten with a screwdriver for an even, leak-free grip.
- THIS KIT: 2 x 19mm blue corrugated pond hose joiners + 4 x 22-30mm zinc plated worm drive clips - for pond pumps and filters, fountains, waterfalls and water features, koi ponds and garden hose runs.
Fitting: measure the internal diameter of each hose, fit each hose fully onto the fitting, slide a clip over each hose end and tighten it with a screwdriver.
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | ABS Filament |
| Colour | Blue |
| Inside diameter | 19mm |
| Outside diameter | 19mm |
| Wall thickness | 2.5mm |
| Temperature range | -20°C to +105°C |
| Shape | Circular |
| Pack quantity | 2 |
| Manufacturer | Auto Silicone Hoses |