2 Pack 16mm 180 Degree U Bend Hose Joiner + 4 Worm Drive Clips Blue
3D printed ABS, made in the UK | Zinc plated steel clamps included | Ribbed barbs for a secure grip | -20°C to +105°C
Brand: AutoSiliconeHoses.com- 1.6cm OD
- -20°C to +105°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- Acrylonitrile Butadiene Styrene (ABS)
- Colour
- Blue
- Outside diameter
- 1.6cm
- Temperature range
- -20°C to +105°C
About this item
- 🔧 180 DEGREE U BEND - joins two hoses of the same internal diameter with a full 180 degree return. Push one end into each hose and secure with the worm drive clips included for a tight, leak-free U bend without kinking the hose.
- 🛡️ RIBBED BARBS FOR A SECURE FIT - raised barbs on both legs grip the inside of the hose, so it holds firm under clips. Suits rubber, silicone and PVC hoses.
- 💪 TOUGH ABS PLASTIC - 3D printed in the UK from impact-resistant ABS with a matte finish. Lightweight, rigid and rated from -20°C to +105°C.
- 🔩 CLIPS INCLUDED - includes 4 x zinc plated worm drive clips, 18-25mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 25mm down to 18mm, to suit a 16mm ID hose with a wall of about 1-4.5mm. Tighten with a screwdriver for an even, leak-free grip.
- 🔵 THIS KIT: 2 x 16mm blue 180 degree U bend joiners + 4 x 18-25mm zinc plated worm drive clips - for pond pumps and filters, water butts, garden irrigation, swimming pools, aquariums, drainage and automotive coolant, vacuum and breather lines.
Product description
180 Degree U Bend Hose Joiner with Worm Drive Clips - this kit includes 2 x 16mm blue 180 degree U bend joiners and 4 x 18-25mm zinc plated worm drive hose clips, so everything needed for the joint arrives together.
- 180 DEGREE U BEND - joins two hoses of the same internal diameter with a full 180 degree return. Push one end into each hose and secure with the worm drive clips included for a tight, leak-free U bend without kinking the hose.
- RIBBED BARBS FOR A SECURE FIT - raised barbs on both legs grip the inside of the hose, so it holds firm under clips. Suits rubber, silicone and PVC hoses.
- TOUGH ABS PLASTIC - 3D printed in the UK from impact-resistant ABS with a matte finish. Lightweight, rigid and rated from -20°C to +105°C.
- CLIPS INCLUDED - includes 4 x zinc plated worm drive clips, 18-25mm, one for each hose end. Zinc plated steel worm drive (jubilee type) clips with a perforated band and screw housing. Each clip tightens from 25mm down to 18mm, to suit a 16mm ID hose with a wall of about 1-4.5mm. Tighten with a screwdriver for an even, leak-free grip.
- THIS KIT: 2 x 16mm blue 180 degree U bend joiners + 4 x 18-25mm zinc plated worm drive clips - for pond pumps and filters, water butts, garden irrigation, swimming pools, aquariums, drainage and automotive coolant, vacuum and breather lines.
Fitting: measure the internal diameter of each hose, fit each hose fully onto the fitting, slide a clip over each hose end and tighten it with a screwdriver.
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Colour | Blue |
| Outside diameter | 1.6cm |
| Temperature range | -20°C to +105°C |
| Shape | Round |
| Pack quantity | 2 |
| Manufacturer | Auto Silicone Hoses |