19mm Multi Purpose Rubber Hose (3/4" ID), Water Coolant Air & Oil 2m
20°C to +100°C (+120°C Peak) | 6.6ft Engine Bay & Workshop Runs | 29mm Outside Diameter | 20/60 Bar Working/Burst
Brand: AP Automotive- 19mm ID
- 29mm OD
- 4.5mm wall
- -20°C TO +100°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AP Automotive
- Material
- Synthetic Rubber
- Colour
- Black
- Inside diameter
- 19mm
- Outside diameter
- 29mm
- Wall thickness
- 4.5mm
- Length
- 2m
- Temperature range
- -20°C TO +100°C
- Maximum pressure
- 20 bar
About this item
- 📏 19MM (3/4") BORE, 2M LENGTH – 19mm internal diameter, 29mm outside diameter and 4.5mm wall, supplied as one continuous 2 metre length (6.6ft, approx. 1 kg), ideal for an engine-bay run or a couple of short lines.
- 🔧 ONE HOSE, MANY JOBS – a multi-purpose rubber hose for water, engine coolant, compressed air, petrol, diesel, engine oil and lubricants. The 19mm bore suits coolant and water transfer, oil and fuel transfer, and compressed air delivery on plant and machinery.
- 🛡️ REINFORCED 3-LAYER CONSTRUCTION – smooth black oil-resistant synthetic rubber inner tube, high-tensile textile reinforcement for strength and stability, and a smooth black NBR rubber cover that stands up to abrasion, weather and ozone.
- 🌡️ RATED -20°C TO +100°C – runs continuously from -20°C to +100°C with peaks to +120°C, so it copes with hot coolant and engine bay heat. Rated 20 bar working and 60 bar burst pressure (3:1 safety factor); 168mm minimum bend radius at 19mm.
- ✂️ EASY TO CUT & FIT – trim square with a sharp blade, push over the hose tail and secure each end with a hose clip sized for the 29mm outside diameter. Longer lengths arrive as one continuous piece, so there are no joins in the run.
Product description
Multi Purpose Rubber Hose – 19mm (3/4") ID x 29mm OD, 2 Metres
A durable, flexible reinforced rubber hose for transferring water, engine coolant, compressed air, fuel, oil and lubricants across automotive, workshop, industrial and agricultural jobs. An oil-resistant synthetic rubber tube, high-tensile textile reinforcement and a tough NBR cover give long, reliable service in hot and cold conditions.
- Size: 19mm internal diameter, 29mm outside diameter, 4.5mm wall, 2 metre length (6.6ft)
- Temperature: -20°C to +100°C continuous, peaks to +120°C
- Pressure: 20 bar working, 60 bar burst (3:1 safety factor)
- Bend radius: 168mm minimum
- Construction: oil-resistant synthetic rubber tube, high-tensile textile reinforcement, NBR rubber cover, smooth black finish
- Media: water, engine coolant, compressed air, petrol, diesel, engine oil and lubricants
Applications: coolant and water transfer, oil and fuel transfer, and compressed air delivery on plant and machinery; radiator, heater and coolant lines, fuel and oil lines on cars, vans, motorbikes, generators, mowers and plant, workshop air and water lines and agricultural machinery. The cover resists abrasion, weathering and ozone, and the smooth bore keeps flow high. Available from 5mm to 25mm bore in lengths from 1 metre up to full coils.
Product details
| Brand | AP Automotive |
|---|---|
| Material | Synthetic Rubber |
| Colour | Black |
| Inside diameter | 19mm |
| Outside diameter | 29mm |
| Wall thickness | 4.5mm |
| Length | 2m |
| Temperature range | -20°C TO +100°C |
| Maximum pressure | 20 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | AP Automotive |