19mm (3/4") Air Hose with 2 Hose Clips, Rubber Compressor Hose 20 Bar, 2m

Pair of 22-30mm Zinc Clamps | -20°C to +80°C (+85°C Peak) | 6.6ft Length | 26mm OD, 3.5mm Wall | ISO 5774 & BS5118/2

Brand: HOSES UK
  • 19mm ID
  • 26mm OD
  • 3.5mm wall
  • -20°C to +80°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£2000

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
HOSES UK
Material
PVC Nitrile Rubber Blend
Colour
Black
Inside diameter
19mm
Outside diameter
26mm
Wall thickness
3.5mm
Length
2m
Temperature range
-20°C to +80°C
Maximum pressure
20 bar

About this item

  • 📦 WHAT'S IN THE BOX – one continuous 2 metres (6.6ft) of 19mm (3/4") bore rubber air line hose, 26mm outside diameter and 3.5mm wall, plus two 22-30mm zinc plated worm drive hose clips to secure it to your hose tails or air line fittings.
  • 💨 BUILT FOR COMPRESSED AIR – rated 20 bar working pressure with a 60 bar burst pressure (3:1 safety factor). The 19mm bore suits large compressors, industrial air mains, site equipment and long high-flow runs.
  • 🛡️ REINFORCED RUBBER CONSTRUCTION – black PVC and nitrile rubber blend inner tube and cover with triple polyester yarn reinforcement, a smooth bore for low pressure loss and a tough outer cover that resists abrasion, oil mist and ozone.
  • 🌡️ -20°C TO +80°C RATED – stays flexible from -20°C to +80°C with peaks to +85°C, lies flat and coils easily. 160mm minimum bend radius. Made to ISO 5774:2016 Type B and BS5118/2.
  • 🔩 MATCHED ZINC CLIPS – the 22-30mm W1 zinc plated worm drive clips are sized for the 26mm outside diameter. Trim the hose square, push it fully onto the tail, slide a clip over each end and tighten with a flat screwdriver or nut driver.

Product description

19mm (3/4") Air Hose with 2 Hose Clips, Rubber Compressor Hose 20 Bar, 2m

A reinforced rubber air line hose for compressors, pneumatic tools and workshop air systems, supplied with two matching zinc plated worm drive hose clips sized for its 26mm outside diameter.

  • ✅ In the box: 2m of 19mm bore rubber air line hose and 2 x 22-30mm zinc plated worm drive hose clips
  • Size: 19mm (3/4") internal diameter, 26mm outside diameter, 3.5mm wall, 2 metre length (6.6ft)
  • Pressure: 20 bar working, 60 bar burst (3:1 safety factor)
  • Temperature: -20°C to +80°C, peaks to +85°C
  • Bend radius: 160mm minimum
  • Standards: ISO 5774:2016 Type B, BS5118/2
  • Cut square to length, push onto the hose tails and secure each end with one of the two clips supplied

Product details

BrandHOSES UK
MaterialPVC Nitrile Rubber Blend
ColourBlack
Inside diameter19mm
Outside diameter26mm
Wall thickness3.5mm
Length2m
Temperature range-20°C to +80°C
Maximum pressure20 bar
ShapeCircular
Pack quantity1
ManufacturerHOSES UK

Products related to this item