180 Degree Silicone U Bend Hose 76mm (3") ID Black with 2 Hose Clips
Pair of 70-90mm Zinc Clamps | -50 to +250°C | 87mm OD | 5.5mm Wall, 4 Ply | 100mm Legs | Full Return Loop | OEM-Style Gloss
Brand: AutoSiliconeHoses.com- 76mm ID
- 87mm OD
- 5.5mm wall
- -50°C TO +250°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit$26.00
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips$35.00
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers$73.00
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat$20.00
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
- Brand
- AutoSiliconeHoses.com
- Material
- Silicone
- Colour
- Black
- Inside diameter
- 76mm
- Outside diameter
- 87mm
- Wall thickness
- 5.5mm
- Length
- 200mm
- Temperature range
- -50°C TO +250°C
- Maximum pressure
- 10.5 bar
About this item
- 📦 WHAT'S IN THE BOX – one 180 degree silicone U bend, 76mm (3") internal diameter x 87mm outside diameter with 100mm on each leg, plus two 70-90mm zinc plated worm drive hose clips: the bend and a clamp for each end in one order.
- 🔧 180 DEGREE BEND – a moulded 180 degree U bend turns the run right back on itself without the kinking you get from bending straight hose. Typical uses at this size: intercooler and charge pipes, large bore induction and air intake pipework, and performance radiator hoses. For air, water and coolant; not for fuel or oil.
- 🌡️ -50°C TO +250°C RATED – rated -50°C to +250°C, so it copes with the heat of the cooling, heater and intake circuits; working pressure 3.5 bar, burst pressure 10.5 bar, bend radius 65mm.
- 🛡️ 4 PLY POLYESTER REINFORCED – SAE J20 R3 – smooth silicone with 4 layers of polyester fabric in the 5.5mm wall, so it holds its shape under pressure and resists ozone, UV light, weathering and ageing.
- 🔩 MATCHED ZINC CLIPS – the two 70-90mm W1 zinc plated worm drive clips are sized for the 87mm outside diameter: push each leg fully onto its pipe, slide a clip over the end and tighten with a flat screwdriver or nut driver.
Product description
180 Degree Silicone U Bend Hose 76mm (3") ID Black with 2 Hose Clips
A moulded 180 degree silicone U bend supplied with two matching zinc plated worm drive hose clips. 4 ply polyester reinforced silicone for air, water and coolant (not fuel or oil), rated -50°C to +250°C.
- ✅ In the box: 1 x 180 degree silicone U bend 76mm ID and 2 x 70-90mm zinc plated worm drive hose clips
- Size: 76mm ID (3"), 5.5mm wall, 87mm outside diameter, 100mm each leg
- Pressure: 3.5 bar working, 10.5 bar burst
- Bend radius: 65mm
- Standard: SAE J20 R3
- Typical uses: intercooler and charge pipes, large bore induction and air intake pipework, and performance radiator hoses
- Fitting: push each leg fully onto the pipe and tighten one clip over each end; re-check once the engine has been up to temperature
Product details
| Brand | AutoSiliconeHoses.com |
|---|---|
| Material | Silicone |
| Colour | Black |
| Inside diameter | 76mm |
| Outside diameter | 87mm |
| Wall thickness | 5.5mm |
| Length | 200mm |
| Temperature range | -50°C TO +250°C |
| Maximum pressure | 10.5 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | Auto Silicone Hoses |