16mm Wire Reinforced Radiator Hose 4m with 2 Hose Clips
Pair of 22-30mm Zinc Clamps | -40°C to +120°C | 27mm OD | 13.1ft Length | Bends Without Kinking
Brand: AP Automotive- 16mm ID
- 27mm OD
- -40°C to +120°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AP Automotive
- Material
- EPDM Rubber
- Colour
- Black
- Inside diameter
- 16mm
- Outside diameter
- 27mm
- Length
- 4m
- Temperature range
- -40°C to +120°C
About this item
- 📦 WHAT'S IN THE BOX – one continuous 4 metres (13.1ft) of wire reinforced radiator hose, 16mm (5/8") internal diameter, 27mm outside diameter, plus two 22-30mm zinc plated worm drive hose clips: the hose and both clamps for the job in one order.
- 🛡️ BUILT TO LAST – flexible black EPDM rubber hose with an embedded steel wire helix and textile braid reinforcement, so it bends round corners without kinking or collapsing.
- 🌡️ -40°C TO +120°C RATED – rated -40°C to +120°C. Suits radiator, coolant and heater lines where the hose has to curve, on cars, vans, tractors, plant and stationary engines.
- ✂️ CUT TO FIT – trim the hose square with a sharp blade, push it fully over the pipe stub and fit a clip over each end. For coolant, antifreeze, water and air; not for fuel or oil.
- 🔩 MATCHED ZINC CLIPS – the 22-30mm W1 zinc plated worm drive clips are sized for the 27mm outside diameter, so they slide over the hose end and close down tight with a flat screwdriver or nut driver.
Product description
16mm Wire Reinforced Radiator Hose 4m with 2 Hose Clips
A wire reinforced radiator hose supplied with two matching zinc plated worm drive hose clips. Flexible black EPDM rubber hose with an embedded steel wire helix and textile braid reinforcement, so it bends round corners without kinking or collapsing. Rated -40°C to +120°C.
- ✅ In the box: 4m of 16mm bore hose and 2 x 22-30mm zinc plated worm drive hose clips
- Size: 16mm (5/8") ID x 27mm OD
- Uses: radiator, coolant and heater lines where the hose has to curve, on cars, vans, tractors, plant and stationary engines
- Cut square to length and secure each end with one of the two clips supplied
- For coolant, antifreeze, water and air. Not for fuel or oil
Product details
| Brand | AP Automotive |
|---|---|
| Material | EPDM Rubber |
| Colour | Black |
| Inside diameter | 16mm |
| Outside diameter | 27mm |
| Length | 4m |
| Temperature range | -40°C to +120°C |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | AP Automotive |