13mm (1/2") Air Hose, Rubber Air Line Compressor Hose 20 Bar, 35m

20°C to +80°C (+85°C Peak) | 115ft Full Coil Length, Fewest Joins | 870psi Burst, 3:1 Safety Factor | 20mm OD, 3.5mm Wall

Brand: HOSES UK
  • 13mm ID
  • 20mm OD
  • 3.5mm wall
  • -20°C TO +80°C

Ask about this product

ap direct

Fast, free delivery, straight from us

  • FREE UK delivery on every order. No minimum spend, no membership.
  • Order before 3pm Monday to Friday and we dispatch the same day.
  • Delivered in 2–3 working days, or choose Express at checkout.
  • Packed and sent from our own warehouse in Mirfield, West Yorkshire.
  • 30-day returns.

£7525

Price includes VAT

How to measure your pipe

Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.

Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.

See all colours and sizes ›

Not sure of your size? Hose size guide ›

Brand
HOSES UK
Material
PVC Nitrile Rubber Blend
Colour
Black
Inside diameter
13mm
Outside diameter
20mm
Wall thickness
3.5mm
Length
35m
Temperature range
-20°C TO +80°C
Maximum pressure
20 bar

About this item

  • 📏 13MM (1/2") BORE, 35M LENGTH – 13mm internal diameter, 20mm outside diameter and 3.5mm wall, supplied as one continuous 35 metre length (115ft, approx. 8.54 kg), ideal for long runs and trade use with the fewest joins.
  • 💨 BUILT FOR COMPRESSED AIR – rated 20 bar working pressure with a 60 bar burst pressure (3:1 safety factor). The 13mm bore suits high-flow tools, sandblasters, workshop ring mains and larger compressors.
  • 🛡️ REINFORCED RUBBER CONSTRUCTION – black PVC and nitrile rubber blend inner tube and cover with triple polyester yarn reinforcement, a smooth bore for low pressure loss, and a tough outer that resists abrasion, oil mist and ozone.
  • 🌡️ -20°C TO +80°C RATED – stays flexible from -20°C to +80°C with peaks to +85°C, lies flat and coils easily. The 13mm bore has a 120mm minimum bend radius. Made to ISO 5774:2016 Type B and BS5118/2.
  • 🔧 CUT TO SUIT YOUR SET-UP – trim square with a sharp blade, push on your hose tails or air line fittings and secure each end with hose clips sized for the 20mm outside diameter. Longer lengths arrive as one continuous piece, so there are no joins in the run.

Product description

Rubber Air Line Hose – 13mm (1/2") ID x 20mm OD, 35 Metres

A durable, flexible rubber air line hose for compressors, pneumatic tools and workshop air systems. A black PVC and nitrile rubber blend tube and cover with triple polyester yarn reinforcement gives strength and pressure stability, while the smooth bore keeps air flow high and pressure loss low.

  • Size: 13mm internal diameter, 20mm outside diameter, 3.5mm wall, 35 metre length (115ft)
  • Pressure: 20 bar working, 60 bar burst (3:1 safety factor)
  • Temperature: -20°C to +80°C, peaks to +85°C
  • Bend radius: 120mm minimum
  • Construction: PVC / nitrile rubber blend tube and cover, triple polyester yarn reinforcement, smooth black finish
  • Standards: ISO 5774:2016 Type B, BS5118/2

Applications: high-flow tools, sandblasters, workshop ring mains and larger compressors; workshop and garage compressors, factory air systems and general compressed air supply. Resists abrasion, oil mist and ozone. Available in 6, 8, 10, 13 and 19mm bores in lengths up to full coils.

Product details

BrandHOSES UK
MaterialPVC Nitrile Rubber Blend
ColourBlack
Inside diameter13mm
Outside diameter20mm
Wall thickness3.5mm
Length35m
Temperature range-20°C TO +80°C
Maximum pressure20 bar
ShapeCircular
Pack quantity1
ManufacturerHOSES UK

Products related to this item