135 Degree Silicone Elbow Hose 8mm (5/16") ID Red + 2 Hose Clips
Pair of 13-20mm Zinc Clamps | -60 to +180°C | 17mm OD | 4.5mm Wall, 3 Ply | Wide Sweeping Turns | Race-Style Gloss
Brand: HOSES UK- 17mm OD
- 4.5mm wall · 3-ply
- -60°C TO +180°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- HOSES UK
- Material
- Silicone
- Colour
- Red
- Outside diameter
- 17mm
- Wall thickness
- 4.5mm
- Reinforcement
- 3-ply polyester
- Length
- 200mm
- Temperature range
- -60°C TO +180°C
- Maximum pressure
- 35 bar
About this item
- 📦 WHAT'S IN THE BOX – one 135 degree silicone elbow, 8mm (5/16") internal diameter x 17mm outside diameter, plus two 13-20mm zinc plated worm drive hose clips: the part and a clamp for each end in one order.
- 🔧 135 DEGREE BEND – a moulded 135 degree elbow makes a wide sweeping turn without the kinking you get from bending straight hose. For air, water and coolant; not for fuel or oil.
- 🌡️ -60°C TO +180°C RATED – stays flexible in heat and cold; 11.7 bar working, 35 bar burst, and resists ozone, UV and coolant so it won't harden or perish like ageing rubber.
- 🛡️ 3-PLY POLYESTER REINFORCED, SAE J20 R3 – 3 layers of polyester fabric in the 4.5mm wall hold the shape under boost pressure and vacuum, with a smooth bore for clean flow.
- 🔩 MATCHED ZINC CLIPS – two 13-20mm zinc plated worm drive hose clips sized for the 17mm outside diameter: push the part fully on, slide the clip over it and tighten with a flat screwdriver or nut driver.
Product description
135 Degree Silicone Elbow Hose 8mm (5/16") ID Red + 2 Hose Clips
A 135 degree silicone elbow supplied with matching zinc plated worm drive hose clips, rated -60°C to +180°C. For air, water and coolant; not for fuel or oil.
- ✅ In the box: 1 x 135 degree silicone elbow, 2 x 13-20mm zinc plated worm drive hose clips
- Size: 135 degree silicone elbow, 8mm (5/16") internal diameter x 17mm outside diameter, 4.5mm wall
- Construction: 3-ply polyester reinforced silicone, SAE J20 R3
- Pressure: 11.7 bar working, 35 bar burst
- Fitting: clean the pipe ends, push the part fully on and tighten one clip over each end; re-check once the engine has been up to temperature
Product details
| Brand | HOSES UK |
|---|---|
| Material | Silicone |
| Colour | Red |
| Outside diameter | 17mm |
| Wall thickness | 4.5mm |
| Reinforcement | 3-ply polyester |
| Length | 200mm |
| Temperature range | -60°C TO +180°C |
| Maximum pressure | 35 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | HOSES UK |