11mm Silicone Hose Joiner Coupler 950mm Black with 2 Hose Clips
2 x 16-22mm Zinc Worm Drive Clips | -60 to +180°C | 20mm OD | 95cm Long | Ready-to-Fit Joint | OEM-Style Gloss
Brand: AP Automotive- 20mm OD
- 4.5mm wall · 3-ply
- -60°C TO +180°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit$26.00
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips$35.00
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers$73.00
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat$20.00
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat$29.00
Shop now ›
- Brand
- AP Automotive
- Material
- Silicone
- Colour
- Black
- Outside diameter
- 20mm
- Wall thickness
- 4.5mm
- Reinforcement
- 3-ply polyester
- Length
- 950mm
- Temperature range
- -60°C TO +180°C
About this item
- 📦 WHAT'S IN THE BOX – one silicone straight coupler, 11mm internal diameter x 950mm long, 20mm outside diameter, plus two 16-22mm zinc plated worm drive hose clips: the part and a clamp for each end in one order.
- 🔧 INLINE JOINT – push the 950mm coupler over two 11mm pipes or spigots of the same size to make a sealed, flexible joint that absorbs engine movement. Cut with a sharp blade for a shorter joint.
- 🌡️ -60°C TO +180°C RATED – stays flexible in heat and cold, and resists ozone, UV and coolant so it won't harden or perish like ageing rubber.
- 🛡️ 3-PLY POLYESTER REINFORCED – 3 layers of polyester fabric in the 4.5mm wall hold the shape under boost pressure and vacuum, with a smooth bore for clean flow.
- 🔩 MATCHED ZINC CLIPS – two 16-22mm zinc plated worm drive hose clips sized for the 20mm outside diameter: push the part fully on, slide the clip over it and tighten with a flat screwdriver or nut driver.
Product description
11mm Silicone Hose Joiner Coupler 950mm Black with 2 Hose Clips
A silicone straight coupler supplied with matching zinc plated worm drive hose clips, rated -60°C to +180°C. For air, water and coolant; not for fuel or oil.
- ✅ In the box: 1 x silicone straight coupler, 2 x 16-22mm zinc plated worm drive hose clips
- Size: silicone straight coupler, 11mm internal diameter x 950mm long, 20mm outside diameter, 4.5mm wall
- Construction: 3-ply polyester reinforced silicone
- Fitting: clean the pipe ends, push the part fully on and tighten one clip over each end; re-check once the engine has been up to temperature
Product details
| Brand | AP Automotive |
|---|---|
| Material | Silicone |
| Colour | Black |
| Outside diameter | 20mm |
| Wall thickness | 4.5mm |
| Reinforcement | 3-ply polyester |
| Length | 950mm |
| Temperature range | -60°C TO +180°C |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | AP Automotive |