10mm (3/8") ID Rubber Airline Hose with 2 Hose Clips, Compressor 20 Bar 7m
Pair of 11-16mm Zinc Clamps | -20°C to +80°C (+85°C Peak) | 23ft Length | 16mm OD, 3mm Wall | 870psi Burst, 3:1 Safety Factor
Brand: AP Automotive- 10mm ID
- 16mm OD
- 3mm wall
- -20°C to +80°C
Ask about this product
RRP:
Price includes VAT
How to measure your pipe
Measure the outside diameter of the pipe or spigot the hose pushes onto, using a ruler or callipers. Choose the hose whose inside diameter (ID) matches that measurement.
Between sizes? Go for the smaller one. Silicone stretches a little to grip, but it can't be clamped down onto a pipe that is too small.
Customers also bought
BundleSilicone Straight Hose, T Bolt Hose Clamps, Black 25mm (1") ID x 400mmHose + 2 T-bolt clamps, ready to fit£17.86
Shop now ›
BundleSilicone Universal Hose with Pipe Clips Blue 25mm (1") ID x 950mm Long950mm hose with pipe clips£24.20
Shop now ›
Multi-buy3 Pack Silicone Straight Coupler Hose Red 25mm (1") ID x 600mm Long3 x 600mm couplers£50.70
Shop now ›
0.5m x 0.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 50cm Floor Mat£13.95
Shop now ›
0.5m x 1.5m Checker Plate Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
0.5m x 1.5m Coin Rubber Anti-Slip Garage Matting Flooring Roll 3mm Thick | 50cm x 150cm Floor Mat£19.95
Shop now ›
- Brand
- AP Automotive
- Material
- PVC Nitrile Rubber Blend
- Colour
- Black
- Inside diameter
- 10mm
- Outside diameter
- 16mm
- Wall thickness
- 3mm
- Length
- 7m
- Temperature range
- -20°C to +80°C
- Maximum pressure
- 20 bar
About this item
- 📦 WHAT'S IN THE BOX – one continuous 7 metres (23ft) of 10mm (3/8") bore rubber air line hose, 16mm outside diameter and 3mm wall, plus two 11-16mm zinc plated worm drive hose clips to secure it to your hose tails or air line fittings.
- 💨 RATED FOR WORKSHOP AIR – rated 20 bar working pressure with a 60 bar burst pressure (3:1 safety factor). The 10mm bore suits air ratchets, grinders, sanders and the main feed from a workshop compressor.
- 🛡️ REINFORCED RUBBER CONSTRUCTION – black PVC and nitrile rubber blend inner tube and cover with triple polyester yarn reinforcement, a smooth bore for low pressure loss and a tough outer cover that resists abrasion, oil mist and ozone.
- 🌡️ -20°C TO +80°C RATED – stays flexible from -20°C to +80°C with peaks to +85°C, lies flat and coils easily. 96mm minimum bend radius. Made to ISO 5774:2016 Type B and BS5118/2.
- 🔩 MATCHED ZINC CLIPS – the 11-16mm W1 zinc plated worm drive clips are sized for the 16mm outside diameter. Trim the hose square, push it fully onto the tail, slide a clip over each end and tighten with a flat screwdriver or nut driver.
Product description
10mm (3/8") ID Rubber Airline Hose with 2 Hose Clips, Compressor 20 Bar 7m
A reinforced rubber air line hose for compressors, pneumatic tools and workshop air systems, supplied with two matching zinc plated worm drive hose clips sized for its 16mm outside diameter.
- ✅ In the box: 7m of 10mm bore rubber air line hose and 2 x 11-16mm zinc plated worm drive hose clips
- Size: 10mm (3/8") internal diameter, 16mm outside diameter, 3mm wall, 7 metre length (23ft)
- Pressure: 20 bar working, 60 bar burst (3:1 safety factor)
- Temperature: -20°C to +80°C, peaks to +85°C
- Bend radius: 96mm minimum
- Standards: ISO 5774:2016 Type B, BS5118/2
- Cut square to length, push onto the hose tails and secure each end with one of the two clips supplied
Product details
| Brand | AP Automotive |
|---|---|
| Material | PVC Nitrile Rubber Blend |
| Colour | Black |
| Inside diameter | 10mm |
| Outside diameter | 16mm |
| Wall thickness | 3mm |
| Length | 7m |
| Temperature range | -20°C to +80°C |
| Maximum pressure | 20 bar |
| Shape | Circular |
| Pack quantity | 1 |
| Manufacturer | AP Automotive |