{"product_id":"silicone-elbow-reducer-45-degree-76-60mm-red-2-stainless-t-bolt-clamps","title":"Silicone Elbow Reducer 45 Degree 76-60mm Red, 2 Stainless T-Bolt Clamps","description":"\u003cul\u003e\n\u003cli\u003e📦 WHAT'S IN THE BOX – one red silicone 45 degree reducer elbow from 76mm to 60mm internal diameter, 87\/71mm outside diameter, plus one 86-91mm and one 68-73mm stainless steel T-bolt clamp: the part and a T-bolt clamp for each end in one order.\u003c\/li\u003e\n\u003cli\u003e🔧 45 DEGREE OFFSET + STEP DOWN – turns 45 degrees and steps a 76mm pipe down to 60mm in one moulded part, with 150mm legs to trim to fit. Match each internal diameter to the outside of the pipe it pushes over.\u003c\/li\u003e\n\u003cli\u003e🌡️ -50°C TO +250°C RATED – silicone stays flexible next to a hot turbo and in cold weather; working pressure 3.5 bar, burst pressure 10.5 bar.\u003c\/li\u003e\n\u003cli\u003e🛡️ 4-PLY POLYESTER REINFORCED, SAE J20 R3 – 4 layers of polyester fabric in the 5.5mm wall hold the shape under boost pressure and vacuum; silicone resists ozone, UV and ageing.\u003c\/li\u003e\n\u003cli\u003e🔩 STAINLESS T-BOLT CLAMPS – one 86-91mm and one 68-73mm stainless steel T-bolt clamp, each sized so the 87\/71mm outside diameter sits inside its clamping range. Full stainless W4 grade with a wide, smooth band and a T-bolt that pulls up evenly all the way round for a firm seal on boost and intercooler pipework.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSilicone Elbow Reducer 45 Degree 76-60mm Red, 2 Stainless T-Bolt Clamps\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA silicone 45 degree reducer elbow from 76mm to 60mm internal diameter supplied with matching stainless steel T-bolt clamps, one for each end, rated -50°C to +250°C. T-bolt clamps give a stronger, more even grip than worm drive clips, so they suit turbo, intercooler and charge pipes where boost pressure can push a hose off. For air, water and coolant; not for fuel or oil.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e✅ \u003cb\u003eIn the box:\u003c\/b\u003e 1 x silicone 45 degree reducer elbow from 76mm to 60mm internal diameter, 1 x 86-91mm stainless steel T-bolt clamp, 1 x 68-73mm stainless steel T-bolt clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize:\u003c\/b\u003e silicone 45 degree reducer elbow from 76mm to 60mm internal diameter, 87\/71mm outside diameter, 5.5mm wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction:\u003c\/b\u003e 4-ply polyester reinforced silicone, SAE J20 R3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePressure:\u003c\/b\u003e 3.5 bar working, 10.5 bar burst\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamps:\u003c\/b\u003e full stainless steel W4 grade band, bridge, T-bolt and nut; wide band with a smooth inner face that won't cut into silicone; uniform 360° clamping, DIN 3017\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow to measure:\u003c\/b\u003e each clamp range is the outside diameter of the hose once it is pushed onto the pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e clean the pipe ends, push the hose fully on, slip a clamp over each end about 5mm in from the edge and tighten the T-bolt evenly; re-check once the engine has been up to temperature\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HOSES UK","offers":[{"title":"Default Title","offer_id":67931190132904,"sku":"SFR076060R-H+STB086091#1+STB068073#1","price":38.45,"currency_code":"GBP","in_stock":true}],"url":"https:\/\/apmotorstore.com\/products\/silicone-elbow-reducer-45-degree-76-60mm-red-2-stainless-t-bolt-clamps","provider":"AP Motorstore","version":"1.0","type":"link"}