{"product_id":"silicone-elbow-reducer-45-degree-38-32mm-red-2-stainless-t-bolt-clamps","title":"Silicone Elbow Reducer 45 Degree 38-32mm Red, 2 Stainless T-Bolt Clamps","description":"\u003cul\u003e\n\u003cli\u003e📦 WHAT'S IN THE BOX – one red silicone 45 degree reducer elbow from 38mm to 32mm internal diameter, 47\/41mm outside diameter, plus one 44-47mm and one 40-43mm stainless steel T-bolt clamp: the part and a T-bolt clamp for each end in one order.\u003c\/li\u003e\n\u003cli\u003e🔧 45 DEGREE OFFSET + STEP DOWN – turns 45 degrees and steps a 38mm pipe down to 32mm in one moulded part, with 150mm legs to trim to fit. Match each internal diameter to the outside of the pipe it pushes over.\u003c\/li\u003e\n\u003cli\u003e🌡️ -50°C TO +250°C RATED – silicone stays flexible next to a hot turbo and in cold weather; working pressure 5 bar, burst pressure 15 bar.\u003c\/li\u003e\n\u003cli\u003e🛡️ 3-PLY POLYESTER REINFORCED, SAE J20 R3 – 3 layers of polyester fabric in the 4.5mm wall hold the shape under boost pressure and vacuum; silicone resists ozone, UV and ageing.\u003c\/li\u003e\n\u003cli\u003e🔩 STAINLESS T-BOLT CLAMPS – one 44-47mm and one 40-43mm stainless steel T-bolt clamp, each sized so the 47\/41mm outside diameter sits inside its clamping range. Full stainless W4 grade with a wide, smooth band and a T-bolt that pulls up evenly all the way round for a firm seal on boost and intercooler pipework.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSilicone Elbow Reducer 45 Degree 38-32mm Red, 2 Stainless T-Bolt Clamps\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA silicone 45 degree reducer elbow from 38mm to 32mm internal diameter supplied with matching stainless steel T-bolt clamps, one for each end, rated -50°C to +250°C. T-bolt clamps give a stronger, more even grip than worm drive clips, so they suit turbo, intercooler and charge pipes where boost pressure can push a hose off. For air, water and coolant; not for fuel or oil.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e✅ \u003cb\u003eIn the box:\u003c\/b\u003e 1 x silicone 45 degree reducer elbow from 38mm to 32mm internal diameter, 1 x 44-47mm stainless steel T-bolt clamp, 1 x 40-43mm stainless steel T-bolt clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize:\u003c\/b\u003e silicone 45 degree reducer elbow from 38mm to 32mm internal diameter, 47\/41mm outside diameter, 4.5mm wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction:\u003c\/b\u003e 3-ply polyester reinforced silicone, SAE J20 R3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePressure:\u003c\/b\u003e 5 bar working, 15 bar burst\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamps:\u003c\/b\u003e full stainless steel W4 grade band, bridge, T-bolt and nut; wide band with a smooth inner face that won't cut into silicone; uniform 360° clamping, DIN 3017\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow to measure:\u003c\/b\u003e each clamp range is the outside diameter of the hose once it is pushed onto the pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e clean the pipe ends, push the hose fully on, slip a clamp over each end about 5mm in from the edge and tighten the T-bolt evenly; re-check once the engine has been up to temperature\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HOSES UK","offers":[{"title":"Default Title","offer_id":67931186757800,"sku":"SFR038032R-H+STB044047#1+STB040043#1","price":23.45,"currency_code":"GBP","in_stock":true}],"url":"https:\/\/apmotorstore.com\/products\/silicone-elbow-reducer-45-degree-38-32mm-red-2-stainless-t-bolt-clamps","provider":"AP Motorstore","version":"1.0","type":"link"}