{"product_id":"rigid-shaft-7mm-clip-driver-2-zinc-mini-hose-clips-8-10mm","title":"Rigid Shaft 7mm Clip Driver + 2 Zinc Mini Hose Clips 8-10mm","description":"\u003cul\u003e\n\u003cli\u003eIN THE BAG: 2 x 8-10mm mini zinc plated W1 hose clips plus 1 x 7mm rigid shaft hose clip driver, 270mm overall length\u003c\/li\u003e\n\u003cli\u003eRIGID SHAFT DRIVER: fixed hard shaft with no flex delivers direct torque and precise control when tightening or loosening clips, ideal in engine bays\u003c\/li\u003e\n\u003cli\u003e7MM HEX SOCKET: matches the 7mm hex screw on every clip in the bag, so it grips the head instead of slipping out of the slot like a flat blade; ergonomic soft grip non-slip handle\u003c\/li\u003e\n\u003cli\u003eMINI ZINC PLATED W1 CLIPS: compact clips for small bore vacuum, breather and air hoses and small pipes where a worm drive clip is too bulky; clamping range 8-10mm - measure the hose outside diameter and make sure it sits inside this range\u003c\/li\u003e\n\u003cli\u003eAPPLICATIONS: automotive, industrial and DIY hose work in dry and under-bonnet locations - radiator, coolant, heater, air intake, breather and vacuum hoses on rubber, silicone and PVC hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWHAT IS IN THE BAG: 2 x 8-10mm W1 zinc plated steel mini hose clips and 1 x 7mm rigid shaft hose clip driver, supplied together in one bag.\u003c\/p\u003e\u003cp\u003eTHE CLIPS: mini hose clips with a 9mm wide, 0.6mm thick W1 zinc plated steel band and a 7mm slotted hex screw. Clamping range 8mm to 10mm. Working temperature -60°C to +180°C, peak +190°C. Zinc plated W1 mini clips are for dry and under-bonnet small bore lines such as vacuum, breather and air hoses.\u003c\/p\u003e\u003cp\u003eTHE DRIVER: 7mm hex socket that fits over the clip screw head, so it grips instead of slipping out of the slot like a flat blade screwdriver. 270mm overall length with a soft grip handle. The rigid shaft does not flex, giving direct torque and precise control when tightening or loosening clips.\u003c\/p\u003e\u003cp\u003eHOW TO CHOOSE THE SIZE: measure the outside diameter (OD) of the hose where the clip will sit, with the hose pushed onto its pipe or spigot. Use callipers, or wrap a strip of paper round the hose, mark the overlap and divide that length by 3.14. This clip fits a hose OD from 8mm to 10mm; for the firmest hold pick a size where your measurement sits in the middle of the range.\u003c\/p\u003e","brand":"AutoSiliconeHoses.com","offers":[{"title":"Default Title","offer_id":67924370260136,"sku":"PMC008010-ASH#2+HCD-ASH","price":17.0,"currency_code":"USD","in_stock":true}],"url":"https:\/\/apmotorstore.com\/products\/rigid-shaft-7mm-clip-driver-2-zinc-mini-hose-clips-8-10mm","provider":"AP Motorstore","version":"1.0","type":"link"}