{"product_id":"45-silicone-elbow-reducer-76-51mm-blue-with-2-stainless-t-bolt-clamps","title":"45° Silicone Elbow Reducer 76-51mm Blue with 2 Stainless T-Bolt Clamps","description":"\u003cul\u003e\n\u003cli\u003e📦 WHAT'S IN THE BOX – one blue silicone 45 degree reducer elbow from 76mm to 51mm internal diameter, 87\/62mm outside diameter, plus one 86-91mm and one 60-63mm stainless steel T-bolt clamp: the part and a T-bolt clamp for each end in one order.\u003c\/li\u003e\n\u003cli\u003e🔧 45 DEGREE OFFSET + STEP DOWN – turns 45 degrees and steps a 76mm pipe down to 51mm in one moulded part, with 150mm legs to trim to fit. Match each internal diameter to the outside of the pipe it pushes over. Typical uses at this size: intercooler and charge pipes, large bore induction and air intake pipework, and performance radiator hoses.\u003c\/li\u003e\n\u003cli\u003e🌡️ -50°C TO +250°C RATED – silicone stays flexible next to a hot turbo and in cold weather; working pressure 3.5 bar, burst pressure 10.5 bar; bend radius 65mm.\u003c\/li\u003e\n\u003cli\u003e🛡️ 4-PLY POLYESTER REINFORCED, SAE J20 R3 – 4 layers of polyester fabric in the 5.5mm wall hold the shape under boost pressure and vacuum; silicone resists ozone, UV and ageing.\u003c\/li\u003e\n\u003cli\u003e🔩 STAINLESS T-BOLT CLAMPS – one 86-91mm and one 60-63mm stainless steel T-bolt clamp, each sized so the 87\/62mm outside diameter sits inside its clamping range. Full stainless W4 grade with a wide, smooth band and a T-bolt that pulls up evenly all the way round for a firm seal on boost and intercooler pipework.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e45° Silicone Elbow Reducer 76-51mm Blue with 2 Stainless T-Bolt Clamps\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA silicone 45 degree reducer elbow from 76mm to 51mm internal diameter supplied with matching stainless steel T-bolt clamps, one for each end, rated -50°C to +250°C. T-bolt clamps give a stronger, more even grip than worm drive clips, so they suit turbo, intercooler and charge pipes where boost pressure can push a hose off. For air, water and coolant; not for fuel or oil.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e✅ \u003cb\u003eIn the box:\u003c\/b\u003e 1 x silicone 45 degree reducer elbow from 76mm to 51mm internal diameter, 1 x 86-91mm stainless steel T-bolt clamp, 1 x 60-63mm stainless steel T-bolt clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize:\u003c\/b\u003e silicone 45 degree reducer elbow from 76mm to 51mm internal diameter, 87\/62mm outside diameter, 5.5mm wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction:\u003c\/b\u003e 4-ply polyester reinforced silicone, SAE J20 R3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePressure:\u003c\/b\u003e 3.5 bar working, 10.5 bar burst\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamps:\u003c\/b\u003e full stainless steel W4 grade band, bridge, T-bolt and nut; wide band with a smooth inner face that won't cut into silicone; uniform 360° clamping, DIN 3017\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow to measure:\u003c\/b\u003e each clamp range is the outside diameter of the hose once it is pushed onto the pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e clean the pipe ends, push the hose fully on, slip a clamp over each end about 5mm in from the edge and tighten the T-bolt evenly; re-check once the engine has been up to temperature\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AutoSiliconeHoses.com","offers":[{"title":"Default Title","offer_id":67931166900392,"sku":"SFR076051B+STB086091#1+STB060063#1","price":50.0,"currency_code":"USD","in_stock":true}],"url":"https:\/\/apmotorstore.com\/products\/45-silicone-elbow-reducer-76-51mm-blue-with-2-stainless-t-bolt-clamps","provider":"AP Motorstore","version":"1.0","type":"link"}