{"product_id":"45-silicone-elbow-reducer-60-45mm-red-with-2-stainless-t-bolt-clamps","title":"45° Silicone Elbow Reducer 60-45mm Red with 2 Stainless T-Bolt Clamps","description":"\u003cul\u003e\n\u003cli\u003e📦 WHAT'S IN THE BOX – one red silicone 45 degree reducer elbow from 60mm to 45mm internal diameter, 71\/54mm outside diameter, plus one 68-73mm and one 51-55mm stainless steel T-bolt clamp: the part and a T-bolt clamp for each end in one order.\u003c\/li\u003e\n\u003cli\u003e🔧 45 DEGREE OFFSET + STEP DOWN – turns 45 degrees and steps a 60mm pipe down to 45mm in one moulded part, with 150mm legs to trim to fit. Match each internal diameter to the outside of the pipe it pushes over. Typical uses at this size: turbo outlet and intercooler pipework, larger radiator hoses, and induction kits.\u003c\/li\u003e\n\u003cli\u003e🌡️ -50°C TO +250°C RATED – silicone stays flexible next to a hot turbo and in cold weather; working pressure 4.2 bar, burst pressure 12.5 bar; bend radius 60mm.\u003c\/li\u003e\n\u003cli\u003e🛡️ 4-PLY POLYESTER REINFORCED, SAE J20 R3 – 4 layers of polyester fabric in the 5.5mm wall hold the shape under boost pressure and vacuum; silicone resists ozone, UV and ageing.\u003c\/li\u003e\n\u003cli\u003e🔩 STAINLESS T-BOLT CLAMPS – one 68-73mm and one 51-55mm stainless steel T-bolt clamp, each sized so the 71\/54mm outside diameter sits inside its clamping range. Full stainless W4 grade with a wide, smooth band and a T-bolt that pulls up evenly all the way round for a firm seal on boost and intercooler pipework.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e45° Silicone Elbow Reducer 60-45mm Red with 2 Stainless T-Bolt Clamps\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA silicone 45 degree reducer elbow from 60mm to 45mm internal diameter supplied with matching stainless steel T-bolt clamps, one for each end, rated -50°C to +250°C. T-bolt clamps give a stronger, more even grip than worm drive clips, so they suit turbo, intercooler and charge pipes where boost pressure can push a hose off. For air, water and coolant; not for fuel or oil.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e✅ \u003cb\u003eIn the box:\u003c\/b\u003e 1 x silicone 45 degree reducer elbow from 60mm to 45mm internal diameter, 1 x 68-73mm stainless steel T-bolt clamp, 1 x 51-55mm stainless steel T-bolt clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize:\u003c\/b\u003e silicone 45 degree reducer elbow from 60mm to 45mm internal diameter, 71\/54mm outside diameter, 5.5mm wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction:\u003c\/b\u003e 4-ply polyester reinforced silicone, SAE J20 R3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePressure:\u003c\/b\u003e 4.2 bar working, 12.5 bar burst\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamps:\u003c\/b\u003e full stainless steel W4 grade band, bridge, T-bolt and nut; wide band with a smooth inner face that won't cut into silicone; uniform 360° clamping, DIN 3017\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow to measure:\u003c\/b\u003e each clamp range is the outside diameter of the hose once it is pushed onto the pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e clean the pipe ends, push the hose fully on, slip a clamp over each end about 5mm in from the edge and tighten the T-bolt evenly; re-check once the engine has been up to temperature\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AutoSiliconeHoses.com","offers":[{"title":"Default Title","offer_id":67931168047272,"sku":"SFR060045R+STB068073#1+STB051055#1","price":49.0,"currency_code":"USD","in_stock":true}],"url":"https:\/\/apmotorstore.com\/products\/45-silicone-elbow-reducer-60-45mm-red-with-2-stainless-t-bolt-clamps","provider":"AP Motorstore","version":"1.0","type":"link"}