{"product_id":"45-silicone-elbow-reducer-42-32mm-red-with-2-stainless-t-bolt-clamps","title":"45° Silicone Elbow Reducer 42-32mm Red with 2 Stainless T-Bolt Clamps","description":"\u003cul\u003e\n\u003cli\u003e📦 WHAT'S IN THE BOX – one red silicone 45 degree reducer elbow from 42mm to 32mm internal diameter, 51\/41mm outside diameter, plus one 48-51mm and one 40-43mm stainless steel T-bolt clamp: the part and a T-bolt clamp for each end in one order.\u003c\/li\u003e\n\u003cli\u003e🔧 45 DEGREE OFFSET + STEP DOWN – turns 45 degrees and steps a 42mm pipe down to 32mm in one moulded part, with 150mm legs to trim to fit. Match each internal diameter to the outside of the pipe it pushes over. Typical uses at this size: top and bottom radiator hoses, thermostat housing pipes, and turbo and intake hoses on smaller engines.\u003c\/li\u003e\n\u003cli\u003e🌡️ -50°C TO +250°C RATED – silicone stays flexible next to a hot turbo and in cold weather.\u003c\/li\u003e\n\u003cli\u003e🛡️ 3-PLY POLYESTER REINFORCED, SAE J20 R3 – 3 layers of polyester fabric in the 4.5mm wall hold the shape under boost pressure and vacuum; silicone resists ozone, UV and ageing.\u003c\/li\u003e\n\u003cli\u003e🔩 STAINLESS T-BOLT CLAMPS – one 48-51mm and one 40-43mm stainless steel T-bolt clamp, each sized so the 51\/41mm outside diameter sits inside its clamping range. Full stainless W4 grade with a wide, smooth band and a T-bolt that pulls up evenly all the way round for a firm seal on boost and intercooler pipework.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e45° Silicone Elbow Reducer 42-32mm Red with 2 Stainless T-Bolt Clamps\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA silicone 45 degree reducer elbow from 42mm to 32mm internal diameter supplied with matching stainless steel T-bolt clamps, one for each end, rated -50°C to +250°C. T-bolt clamps give a stronger, more even grip than worm drive clips, so they suit turbo, intercooler and charge pipes where boost pressure can push a hose off. For air, water and coolant; not for fuel or oil.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e✅ \u003cb\u003eIn the box:\u003c\/b\u003e 1 x silicone 45 degree reducer elbow from 42mm to 32mm internal diameter, 1 x 48-51mm stainless steel T-bolt clamp, 1 x 40-43mm stainless steel T-bolt clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize:\u003c\/b\u003e silicone 45 degree reducer elbow from 42mm to 32mm internal diameter, 51\/41mm outside diameter, 4.5mm wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction:\u003c\/b\u003e 3-ply polyester reinforced silicone, SAE J20 R3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamps:\u003c\/b\u003e full stainless steel W4 grade band, bridge, T-bolt and nut; wide band with a smooth inner face that won't cut into silicone; uniform 360° clamping, DIN 3017\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHow to measure:\u003c\/b\u003e each clamp range is the outside diameter of the hose once it is pushed onto the pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e clean the pipe ends, push the hose fully on, slip a clamp over each end about 5mm in from the edge and tighten the T-bolt evenly; re-check once the engine has been up to temperature\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AutoSiliconeHoses.com","offers":[{"title":"Default Title","offer_id":67931167490216,"sku":"SFR042032R+STB048051#1+STB040043#1","price":40.0,"currency_code":"USD","in_stock":true}],"url":"https:\/\/apmotorstore.com\/products\/45-silicone-elbow-reducer-42-32mm-red-with-2-stainless-t-bolt-clamps","provider":"AP Motorstore","version":"1.0","type":"link"}