{"product_id":"45-degree-silicone-elbow-hose-51mm-2-id-blue-with-2-hose-clips","title":"45 Degree Silicone Elbow Hose 51mm (2\") ID Blue with 2 Hose Clips","description":"\u003cul\u003e\n\u003cli\u003e📦 WHAT'S IN THE BOX – one 45 degree silicone elbow, 51mm (2\") internal diameter x 62mm outside diameter with 150mm on each leg, plus two 55-70mm zinc plated worm drive hose clips: the bend and a clamp for each end in one order.\u003c\/li\u003e\n\u003cli\u003e🔧 45 DEGREE BEND – a moulded 45 degree elbow makes a gentle offset turn without the kinking you get from bending straight hose. Typical uses at this size: turbo outlet and intercooler pipework, larger radiator hoses, and induction kits. For air, water and coolant; not for fuel or oil.\u003c\/li\u003e\n\u003cli\u003e🌡️ -50°C TO +250°C RATED – rated -50°C to +250°C, so it copes with the heat of the cooling, heater and intake circuits; working pressure 4.5 bar, burst pressure 13.5 bar, bend radius 51mm.\u003c\/li\u003e\n\u003cli\u003e🛡️ 4 PLY POLYESTER REINFORCED – SAE J20 R3 – smooth silicone with 4 layers of polyester fabric in the 5.5mm wall, so it holds its shape under pressure and resists ozone, UV light, weathering and ageing.\u003c\/li\u003e\n\u003cli\u003e🔩 MATCHED ZINC CLIPS – the two 55-70mm W1 zinc plated worm drive clips are sized for the 62mm outside diameter: push each leg fully onto its pipe, slide a clip over the end and tighten with a flat screwdriver or nut driver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e45 Degree Silicone Elbow Hose 51mm (2\") ID Blue with 2 Hose Clips\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA moulded 45 degree silicone elbow supplied with two matching zinc plated worm drive hose clips. 4 ply polyester reinforced silicone for air, water and coolant (not fuel or oil), rated -50°C to +250°C.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e✅ \u003cb\u003eIn the box:\u003c\/b\u003e 1 x 45 degree silicone elbow 51mm ID and 2 x 55-70mm zinc plated worm drive hose clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize:\u003c\/b\u003e 51mm ID (2\"), 5.5mm wall, 62mm outside diameter, 150mm each leg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePressure:\u003c\/b\u003e 4.5 bar working, 13.5 bar burst\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBend radius:\u003c\/b\u003e 51mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStandard:\u003c\/b\u003e SAE J20 R3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTypical uses:\u003c\/b\u003e turbo outlet and intercooler pipework, larger radiator hoses, and induction kits\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e push each leg fully onto the pipe and tighten one clip over each end; re-check once the engine has been up to temperature\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AutoSiliconeHoses.com","offers":[{"title":"Default Title","offer_id":67822911258792,"sku":"SSE045051B-ASH-PRIME+PHC5570#2","price":28.0,"currency_code":"USD","in_stock":true}],"url":"https:\/\/apmotorstore.com\/products\/45-degree-silicone-elbow-hose-51mm-2-id-blue-with-2-hose-clips","provider":"AP Motorstore","version":"1.0","type":"link"}