{"product_id":"135-degree-silicone-elbow-hose-13mm-1-2-id-red-with-2-hose-clips","title":"135 Degree Silicone Elbow Hose 13mm (1\/2\") ID Red with 2 Hose Clips","description":"\u003cul\u003e\n\u003cli\u003e📦 WHAT'S IN THE BOX – one 135 degree silicone elbow, 13mm (1\/2\") internal diameter x 22mm outside diameter with 100mm on each leg, plus two 18-25mm zinc plated worm drive hose clips: the bend and a clamp for each end in one order.\u003c\/li\u003e\n\u003cli\u003e🔧 135 DEGREE BEND – a moulded 135 degree elbow makes a wide sweeping turn without the kinking you get from bending straight hose. Typical uses at this size: vacuum and breather lines, heater bypass and small coolant feeds, and throttle body coolant pipes. For air, water and coolant; not for fuel or oil.\u003c\/li\u003e\n\u003cli\u003e🌡️ -50°C TO +250°C RATED – rated -50°C to +250°C, so it copes with the heat of the cooling, heater and intake circuits; working pressure 8.3 bar, burst pressure 27 bar, bend radius 16mm.\u003c\/li\u003e\n\u003cli\u003e🛡️ 3 PLY POLYESTER REINFORCED – SAE J20 R3 – smooth silicone with 3 layers of polyester fabric in the 4.5mm wall, so it holds its shape under pressure and resists ozone, UV light, weathering and ageing.\u003c\/li\u003e\n\u003cli\u003e🔩 MATCHED ZINC CLIPS – the two 18-25mm W1 zinc plated worm drive clips are sized for the 22mm outside diameter: push each leg fully onto its pipe, slide a clip over the end and tighten with a flat screwdriver or nut driver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003e135 Degree Silicone Elbow Hose 13mm (1\/2\") ID Red with 2 Hose Clips\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eA moulded 135 degree silicone elbow supplied with two matching zinc plated worm drive hose clips. 3 ply polyester reinforced silicone for air, water and coolant (not fuel or oil), rated -50°C to +250°C.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e✅ \u003cb\u003eIn the box:\u003c\/b\u003e 1 x 135 degree silicone elbow 13mm ID and 2 x 18-25mm zinc plated worm drive hose clips\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize:\u003c\/b\u003e 13mm ID (1\/2\"), 4.5mm wall, 22mm outside diameter, 100mm each leg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePressure:\u003c\/b\u003e 8.3 bar working, 27 bar burst\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBend radius:\u003c\/b\u003e 16mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStandard:\u003c\/b\u003e SAE J20 R3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTypical uses:\u003c\/b\u003e vacuum and breather lines, heater bypass and small coolant feeds, and throttle body coolant pipes\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e push each leg fully onto the pipe and tighten one clip over each end; re-check once the engine has been up to temperature\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AutoSiliconeHoses.com","offers":[{"title":"Default Title","offer_id":67822937604264,"sku":"SSE135013R-ASH-PRIME+PHC1825#2","price":13.95,"currency_code":"GBP","in_stock":true}],"url":"https:\/\/apmotorstore.com\/products\/135-degree-silicone-elbow-hose-13mm-1-2-id-red-with-2-hose-clips","provider":"AP Motorstore","version":"1.0","type":"link"}